Any CNC tail for a Mars Poseidon

[Benares Enferno]

Is there any company that makes a CNC tail for the Poseidon. The reason I ask is, I had problems with the tail when I over tightened the screws and it caused it to pinch the gears a bit. Had a real bad wag on the tail because of this. I was hoping someone out there has tried maybe using a CNC tail designed for another heli.

[furex]

I think this upgrade is not available; But the Tail gear box does not need to be over tightened.
Of course you can try with a tail box from an other 450 class like trex,etc....
Just check the ratio between the belt drive gear and the tail drive gear