START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Walkera Helicopters Walkera Helicopter Support |
|
LinkBack | Thread Tools | Display Modes |
05-16-2015, 08:42 PM | #1 (permalink) |
Registered Users
Join Date: Aug 2008
|
walkera rx2703h-d gyro
I've seen lots of people ask on various forums what's the frequency this gyro works at.I took my oscilloscope and hooked it to the signal pin of the cyclic and tail gyro pins and saw a clean square wave with a pulse of 1.5ms as I measured it with a spacing of 1.5ms as well which according to my calculations is 333 Hz.It showed 301Hz when I hooked a frequency counter to the same pins which means the cyclic and tail servos must operate at this frequency as well.
|
Sponsored Links | |||
Advertisement |
|
Thread Tools | |
Display Modes | |
|
|