Register Now

72mhz · 01-26-2012, 04:04 AM

Do the users of the Spartan Gyros find that the USB link is a good tool to have? I quess my questions would better be put as: For those of us that are not 3D flyers...yet, are the basic settings of the gyro by using the push button enough or are there things within the gyro that can only be gained by the USB link to computer that would be of use at this level?

Thanks

R/C Mayhem · 01-28-2012, 08:02 AM

I have the same question. Is it worth the extra cost for the link and link adaptor?
I have my Quark programed the basic way 72 mentioned.
It works good, Am I missing added benifit?

Taz00 · 01-29-2012, 03:54 PM

I have the usb link.
The only thing I have ever used it for was to update the firmware.
The gyro works so well as it is that I do not feel the need to change any of the settings.
This goes for all my helis with a quark. From a trex 250 to a 550.

R/C Mayhem · 01-31-2012, 04:39 PM

Thank you Taz

01-26-2012, 04:04 AM	#1 (permalink)
72mhz Registered Users Join Date: Nov 2011	USB link for Gyro Do the users of the Spartan Gyros find that the USB link is a good tool to have? I quess my questions would better be put as: For those of us that are not 3D flyers...yet, are the basic settings of the gyro by using the push button enough or are there things within the gyro that can only be gained by the USB link to computer that would be of use at this level? Thanks

01-28-2012, 08:02 AM	#2 (permalink)
R/C Mayhem Registered Users Join Date: Jul 2011	I have the same question. Is it worth the extra cost for the link and link adaptor? I have my Quark programed the basic way 72 mentioned. It works good, Am I missing added benifit? __________________ Because helicopters...that's why. MCX, MQX, MCPX, Blade 450 3D, Gaui 550. Turnigy 9X Spektrum DX6i.

01-31-2012, 04:39 PM	#4 (permalink)
R/C Mayhem Registered Users Join Date: Jul 2011	Thank you Taz __________________ Because helicopters...that's why. MCX, MQX, MCPX, Blade 450 3D, Gaui 550. Turnigy 9X Spektrum DX6i.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-29-2012, 03:54 PM	#3 (permalink)
Taz00 Registered Users Join Date: Jan 2009	I have the usb link. The only thing I have ever used it for was to update the firmware. The gyro works so well as it is that I do not feel the need to change any of the settings. This goes for all my helis with a quark. From a trex 250 to a 550.

Register Now

Log-in