Register Now

Jermo · 05-24-2012, 07:37 PM

Talk about easy to install! I only got to do a test hover in the house for bit. Tomorrow will be a full test flight. Based on the test hover the motor has plenty of power and then some

. The only precaution I took was to split the tail case and route the tail motor wires outside rather than up next to the steel tail shaft. Just one less thing to worry about in the event of a crash.
Jer

ror1 · 05-25-2012, 10:14 AM

so what exactly do you get with that readyheli:
1) tail boom made of ?
2) 2 batteries size?
3) frame with M5 motor fitted?
4) pinion fitted...size ?
5) PNP speed control?
there web site is terrible..

Jermo · 05-25-2012, 11:09 AM

1) tail boom made of ? hollow steel rod, longer than the stock boom
2) 2 batteries size? 300mAH 35C 1S
3) frame with M5 motor fitted? Yes 11000KV
4) pinion fitted...size ? I think it's an 8t . it's very small
5) PNP speed control? 10Amp

It's sold as Readyheli OEM so they do all the support.
Jer

05-24-2012, 07:37 PM	#1 (permalink)
Jermo Registered Users Join Date: Nov 2006	Readyheli BLConversion came in today... Talk about easy to install! I only got to do a test hover in the house for bit. Tomorrow will be a full test flight. Based on the test hover the motor has plenty of power and then some . The only precaution I took was to split the tail case and route the tail motor wires outside rather than up next to the steel tail shaft. Just one less thing to worry about in the event of a crash. Jer __________________ Jerry Moore, AMA #878954,TARANIS OpenTX- Pantera 600 FB - Pantera .60 FB - Takes a licking and keeps on kicking! KISSAM = Keep It Simple Stupid: Affordable, Maintainable - Visit Early and often - http://open-txu.org

05-25-2012, 10:14 AM	#2 (permalink)
ror1 Registered Users My HF Map location Join Date: Apr 2011	so what exactly do you get with that readyheli: 1) tail boom made of ? 2) 2 batteries size? 3) frame with M5 motor fitted? 4) pinion fitted...size ? 5) PNP speed control? there web site is terrible.. __________________ MCPXBL(M5)8T, MCPXBL(C05M)9T,450-3D, DX8, Phoenix

05-25-2012, 11:09 AM	#3 (permalink)
Jermo Registered Users Thread Starter Join Date: Nov 2006	1) tail boom made of ? hollow steel rod, longer than the stock boom 2) 2 batteries size? 300mAH 35C 1S 3) frame with M5 motor fitted? Yes 11000KV 4) pinion fitted...size ? I think it's an 8t . it's very small 5) PNP speed control? 10Amp It's sold as Readyheli OEM so they do all the support. Jer __________________ Jerry Moore, AMA #878954,TARANIS OpenTX- Pantera 600 FB - Pantera .60 FB - Takes a licking and keeps on kicking! KISSAM = Keep It Simple Stupid: Affordable, Maintainable - Visit Early and often - http://open-txu.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in