 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| nano QX Blade nano QX Information and Help |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
11-18-2013, 07:30 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Dec 2011
|
nano qx won't lift off with full battery.
Nano will not lift off and starts blinking like its hit LVC shortly after powering up. Charged battey with 2 seperate chargers to insure they were charged. Ideas? This just began happening.
__________________
While driving my girlfriend always asks "Wait, this looks like we're on the way to the hobbystore"...I casually change the subject. Ive been winning this game since 2009. 
|
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
11-18-2013, 08:02 PM
|
#2 (permalink) |
|
Registered Users
|
Re: nano qx won't lift off with full battery.
Bad battery?
Charger have a discharge or storage charge option? If so set the discharge amps to what the nQX roughly draws and and start with a fully charged battery and check the voltage drop under load. If the store or discharge ends nearly immediately the battery is done or possibly a connection issue. If it doesn't something in the nQX is drawing more than it should. Regards, Steve
__________________
Regards, Steve |
|
|
|
|
11-18-2013, 08:34 PM
|
#3 (permalink) |
|
Registered Users
Join Date: Jan 2013
|
If you're confident the batteries are good I bet it's a motor going out. Any of them getting hotter than the others? If you've got a decent charger you can do some testing on them.
__________________
450X, 350 QX (GoPro H3B), 130X, Nano CP X, Nano QX, Hubsan X4, Proto X Nano Spektrum DX7s Phoenix Sim Aerial pics at http://foosyou.imgur.com |
|
|
|
|
11-18-2013, 11:50 PM
|
#4 (permalink) |
|
Registered Users
Join Date: Oct 2013
|
The obvious... check for hair or fiber stuck on the driveshaft.... make sure prop leading edges are sharp... if not scrape them with a fingernail until they are. This can really make a world of difference with these things. If neither of these are issues, yeah, it's probably a motor going bad.
__________________
"Your tone says insult, but what I'm hearing is a tempting offer." ~ Wilfred
mCPX BL ■ 130x ■ Gaui X2 ■ 450x ■ Warp 360 ■ 500x ■ 550x ■ Devo 6s v4 Deviation |
|
|
|
|
11-18-2013, 11:53 PM
|
#5 (permalink) |
|
Registered Users
Join Date: Apr 2011
|
nano qx won't lift off with full battery.
__________________
Heli's I have: Goblin 500 (Vbar Neo), Gaui X5(Vbar Neo), X7(Vbar Neo), Innova 600 Night heli (Vbar Neo Vbar Vcontrol I'm the not so newbheliusr as I have been here a while. But I like this name. |
|
|
|
|
11-19-2013, 04:17 AM
|
#6 (permalink) |
|
Registered Users
Join Date: Aug 2013
|
Had this happen to me a few times,(blinking blue light with fresh battery when trying to take off) in my case it was a loose wire from motor plugging into board. Make sure they are all seated properly.
|
|
|
|
|
11-19-2013, 04:21 AM
|
#7 (permalink) | |
|
Registered Users
|
Re: nano qx won't lift off with full battery.
Quote:
Scuffed prop wouldn't cause the lvc to go off so quickly. If not the battery I would definitely check for hair or whatever though, as that could really draw some amps. Regards, Steve
__________________
Regards, Steve |
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
