Twister cp gold spinning

[Skruffens]

Hi!

I just bought my first rc helicopter. A used one but has never been flyed only tested a few times.

I have a problem. When I start it up and speed up the engine it sarts spinning in circles. More rpm more spinning :/
When it takes of it spinns like crazy.
I am new to rc helicopters so I am not sure what to do. I have tryed so much now.
I went through the settings for the radio and set up all to the default settings for the cp gold as it was written in the instruction book. Didn't help.
I tryed to revers the tail rotor setting, but same problem.*
I tryed to adjust the gain for the tail rotor, but no help.
I also the slidebutton under the radiostick to adjust left or right, but no help.
Everything works on the chopper when using the radio.
But finally I think I am on the right track. The two blades over the main rotor, don't know what it's called but you know what I mean, they were not flat adjustet, they were like 45 degrees. I adjusted them so they are flat like the main rotor and now when I try to start it up it still spinns but now I can control a bit more with my radio. Before adjusting it spinned to one side, but now it switches sides. Spinns out to the left and I can stear to the right and it stopps spinning but when its about to take of it spinns out again.
Something happend when I adjusted the blades like I said, but still no good.
Pls help me solving this so I can finally take a trip with my helicopter

[spykez]

Gosh, I don't know where to begin. Never heard of this heli. Sounds like you have paddles on it.

Post link or pictures maybe of swash and tail and radio, and definitely some video of the problem. that might help. And tell us which way the main rotor is turning and the tail rotor is turning.

[755 robert]

Reverse the gyro?? ...More info and pictures will help...