Platinum 100A V3 Two Bec wires?

[M3bluegsr]

Just purchased this esc to use on my Goblin 500 and I am confused about the two long wires. Manual says one normal throttle with Bec and separate Red/black Bec wire with separate orange rpm connector.

Do both of these wires go into my flybarless system (minus orange lead) for the Bec to work properly at higher currents?

If so, I plug the white/red/black into throttle port on FBL and Red/Black wire to an Aux port on Ar7200bx?

Thanks in advance.

[UCPharmD]

Yes. The RBW wire goes into the throttle channel. The other that has just the RB wire goes into the FBL in an unused port to supply power, so aux1 works for this.

I'm using this in my Goblin 500 with an ikon and it works fine.