Register Now

handsomefatty · 08-25-2012, 09:01 AM

Gents:
I spec'd BeastX V3.0 with JR sattelite on my 450 Sport. The missing rudder keeps happening to me when giving + pitch maneuver I can not get my 450 turning to right.

It's about i trying to move the rudder stick to right but nothing happen. Rudder going to left is fine, I can say i can expect it happens all the time when postive pitch was given no matter when the heli in eights and stall turn. Scare **** out of me for the very first time and i knew how to deal with right now but still very risky to fly a heli w/o rudder turning to right.

For the missing rudder issue, I've got the silled flyers checking the machancal function for 450 tail rudder on the ground. Everything works out fine and no interference issue at all when hovering normal. But it did happen only on 450, Any thoughts?

Drivinfast247 · 08-25-2012, 09:15 AM

Binding under load?

Ranger71d · 08-25-2012, 10:53 AM

Check the slide and tail bearings. +1 on suspecting something is binding under load.

R71D
Sent from my phone, excuse the bad grammar and auto corrections.

helidude71 · 08-25-2012, 03:34 PM

Rubber? Must be weekend.

bwijk · 08-25-2012, 08:51 PM

You beat me at it Helidude

( alhoewel het ook lubber geweest kant zijn)

handsomefatty · 08-26-2012, 12:27 AM

Reset the tail gain of Hold switch from 0% to 35% in the governer (JR Tx) to be equal as others and problem solved. Seems like the the tail gain being binding together for normal/ Idel 1/ 2/ Hold.

08-25-2012, 09:01 AM	#1 (permalink)
handsomefatty Registered Users Join Date: Nov 2011	The missing rubber control Gents: I spec'd BeastX V3.0 with JR sattelite on my 450 Sport. The missing rudder keeps happening to me when giving + pitch maneuver I can not get my 450 turning to right. It's about i trying to move the rudder stick to right but nothing happen. Rudder going to left is fine, I can say i can expect it happens all the time when postive pitch was given no matter when the heli in eights and stall turn. Scare **** out of me for the very first time and i knew how to deal with right now but still very risky to fly a heli w/o rudder turning to right. For the missing rudder issue, I've got the silled flyers checking the machancal function for 450 tail rudder on the ground. Everything works out fine and no interference issue at all when hovering normal. But it did happen only on 450, Any thoughts? Last edited by handsomefatty; 08-25-2012 at 08:37 PM..

08-25-2012, 10:53 AM	#3 (permalink)
Ranger71d Registered Users Join Date: Feb 2011	Check the slide and tail bearings. +1 on suspecting something is binding under load. R71D Sent from my phone, excuse the bad grammar and auto corrections. __________________ R71d Futaba T8FGS - Goblin 500, Gaui X2, Heli-Max Axe 100CP, and miscellaneous crashed heli parts...

08-25-2012, 03:34 PM	#4 (permalink)
helidude71 Registered Users Join Date: Apr 2010	Rubber? Must be weekend. __________________ TSH Gaui X5 FES, Spirit, S.Bus, HW100A V3, Formula swash/head TSH Gaui X3, Spirit, 6S, S.Bus, HW50A V3 Futaba T7C (I admit, also a Spektrum DX8 and some planks.) ;-) Phoenix R/C v5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-25-2012, 09:15 AM	#2 (permalink)
Drivinfast247 Registered Users Join Date: Jun 2009	Binding under load?

08-25-2012, 08:51 PM	#5 (permalink)
bwijk Registered Users My HF Map location Join Date: Jun 2008	You beat me at it Helidude ( alhoewel het ook lubber geweest kant zijn)

08-26-2012, 12:27 AM	#6 (permalink)
handsomefatty Registered Users Thread Starter Join Date: Nov 2011	Reset the tail gain of Hold switch from 0% to 35% in the governer (JR Tx) to be equal as others and problem solved. Seems like the the tail gain being binding together for normal/ Idel 1/ 2/ Hold.

Register Now

Log-in