Register Now

airman18 · 11-03-2008, 08:06 AM

Hi,to you all.My question is how can i reset the above rx in order to use another tx's module as mine was damaged .

BarracudaHockey · 11-03-2008, 09:54 AM

Re-bind it.

Plug in the bind plug to the BIND/BATT slot
Plug power into any other slot.
When the lights start flashing turn on the transmitter holding down the bind button.
When the lights come on solid, release the bind button, turn everything off and remove the bind plug.
Operate normally

11-03-2008, 08:06 AM	#1 (permalink)
airman18 Join Date: Nov 2008	ar 7000 reset Hi,to you all.My question is how can i reset the above rx in order to use another tx's module as mine was damaged .

11-03-2008, 09:54 AM	#2 (permalink)
BarracudaHockey Registered Users My HF Map location Join Date: Jan 2005	Re-bind it. Plug in the bind plug to the BIND/BATT slot Plug power into any other slot. When the lights start flashing turn on the transmitter holding down the bind button. When the lights come on solid, release the bind button, turn everything off and remove the bind plug. Operate normally __________________ Andy AMA 77227 Jacksonville FL http://www.jaxrc.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in