V120d02S RX2636H-D bind problem

[fredic91]

Hello everybody
I recently bought for my old V120d02 a Walkera RX2636H-D receiver (a new one).
My transmitter is a Devo 8S with Version 4.0.1of Deviation that works great with my other Walkera helicopters.
I flashed this receiver with Walkera firmware version V1.1 2012-8-6 (with telemetry).
I can not bind this new receiver with my Tx. I tried everything!
By reading various specialized forums I saw that this problem is known but I have not found any solution to resolve it.
At Walkera.com ... almost nothing about helicopters ... they have completely forgotten the past !!
It bored me to put all this new equipment in the trash anyway!
Any ideas?

Thank you

[Sam19600]

Please try to clear Fixed ID first, then set up new Fixed ID again.
Below are how to do, I had excerpted from old threads.
Thanks for original post owners.

How to clear Fixed ID

Connect bind plug to elev channel.
Power up heli. Red led slow blinking.
Power off. (This should clear up any Fixed id).
Remove bind plug.

How to set up Fixed ID

In this RX version, you have to bind using random ID first, then go to fixed id setting and don't change the id. Just accept the one generated.

The rx will bind to this id without problem even after many cycles.

If you change the Id after the first bind, it will only work until you power off and it won't bind afterwards.

[fredic91]

Originally Posted by Sam19600

Please try to clear Fixed ID first, then set up new Fixed ID again.
Below are how to do, I had excerpted from old threads.
Thanks for original post owners.

How to clear Fixed ID

Connect bind plug to elev channel.
Power up heli. Red led slow blinking.
Power off. (This should clear up any Fixed id).
Remove bind plug.

How to set up Fixed ID

In this RX version, you have to bind using random ID first, then go to fixed id setting and don't change the id. Just accept the one generated.

The rx will bind to this id without problem even after many cycles.

If you change the Id after the first bind, it will only work until you power off and it won't bind afterwards.

I tried all things...don't work anymore!!!

I ask the seller to send me back a replacement RX!

@SAM19600 : Thanls a lot!