Register Now

soulman · 03-11-2017, 01:35 PM

My problem is vertical tail wag.
In the video I turn Blades up and down, and there is quite Some slop.
Servo is Savox sh 1250mg.
Is this slop normal or bad ??

HD 500 slop (0 min 38 sec)

Greetings,
Gert

im4711 · 03-11-2017, 06:39 PM

hard to tell - I do remember that my savox servos did last only about 200 flights and start building extreme slop. After 250 flights I had to take them out (put new gears in them and gave them to a friend for free).

Back 2 years ago the saves servo gears have been a bit soft.

Still not sure if thats the issue on the video.

03-11-2017, 06:39 PM	#2 (permalink)
im4711 Registered Users My HF Map location Join Date: Oct 2008	hard to tell - I do remember that my savox servos did last only about 200 flights and start building extreme slop. After 250 flights I had to take them out (put new gears in them and gave them to a friend for free). Back 2 years ago the saves servo gears have been a bit soft. Still not sure if thats the issue on the video. __________________ Kontronik, Switch Blades, Bavarian Demon, TDR, TDF, Diabolo, HeliBaby, Takumi and Banshee

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in