Register Now

hewittrelo · 08-16-2012, 10:53 PM

I have somehow lost all my cyclic movement in my new kk2.0 board...j did a receiver test and all seems well..it just stopped working between gain adjustment... my tail esc also now gets hot while idle and powered but will cool down if unplugged from board..anyone have any ideas on what i could do or maybe how to reset board to factory...this is my first tri so i wont be surprised if it is something i did...thanks all

pinguin · 08-22-2012, 05:40 AM

Try to upgrade the fw to v1.2

Blackbird1 · 08-22-2012, 02:26 PM

How you upgrade the firmware?
Thanks.

mhevansusa · 08-22-2012, 02:57 PM

Here you go...

kk2_1V2.zip

pinguin · 08-23-2012, 05:45 AM

But upgrading to v1.2 is at your own risk. I did upgrade mine and I'm using on quad. The quad wobble more than v1 fw. I thought it just me. Then I read that many people has the same experience. They prefer v1 fw, but unfortunately v1 is not available.
I know that v1.2 fix jittery on tri servo.
You need to have USBasp AVR programmer to update the firmware.

petedee · 08-23-2012, 02:40 PM

1.1 is available, have you tried that?

boykintom · 08-23-2012, 07:13 PM

Quote:

Originally Posted by petedee

1.1 is available, have you tried that?

Pete,

Pinguin and I have had different experiences with v1.2. His quad wobbles and my hex works great. Have you tried it yet?

BKT

hewittrelo · 08-23-2012, 08:23 PM

Well i figured out my problem..... i had to disengage the self leveling feature and all my control has come back...wish that something wasn't broken but i am not using self level anyways...i built it solely for aerobatics...

08-16-2012, 10:53 PM	#1 (permalink)
hewittrelo Registered Users Join Date: Jul 2012	tricopter kk2.0 problem I have somehow lost all my cyclic movement in my new kk2.0 board...j did a receiver test and all seems well..it just stopped working between gain adjustment... my tail esc also now gets hot while idle and powered but will cool down if unplugged from board..anyone have any ideas on what i could do or maybe how to reset board to factory...this is my first tri so i wont be surprised if it is something i did...thanks all

08-22-2012, 02:57 PM	#4 (permalink)
mhevansusa Registered Users My HF Map location Join Date: Feb 2011	KK2 FW update file Here you go... kk2_1V2.zip __________________ Goblin 700 - Goblin 500 - QAV540G - QAV500G - QAV400 - QAV250 - Disco Pro

08-23-2012, 02:40 PM	#6 (permalink)
petedee Registered Users Join Date: Sep 2011	1.1 is available, have you tried that? __________________ similis vobis fugere eam furatus "The beatings will continue until morale improves." -- William Bligh

08-23-2012, 08:23 PM	#8 (permalink)
hewittrelo Registered Users Thread Starter Join Date: Jul 2012	kk2.0 Well i figured out my problem..... i had to disengage the self leveling feature and all my control has come back...wish that something wasn't broken but i am not using self level anyways...i built it solely for aerobatics...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-22-2012, 05:40 AM	#2 (permalink)
pinguin Registered Users Join Date: Apr 2009	Try to upgrade the fw to v1.2

08-22-2012, 02:26 PM	#3 (permalink)
Blackbird1 Registered Users Join Date: Apr 2009	How you upgrade the firmware? Thanks.

08-23-2012, 05:45 AM	#5 (permalink)
pinguin Registered Users Join Date: Apr 2009	But upgrading to v1.2 is at your own risk. I did upgrade mine and I'm using on quad. The quad wobble more than v1 fw. I thought it just me. Then I read that many people has the same experience. They prefer v1 fw, but unfortunately v1 is not available. I know that v1.2 fix jittery on tri servo. You need to have USBasp AVR programmer to update the firmware.

Register Now

Log-in