Cc ice lite 50 low end point sensor prob

[helisrmylife]

Hi guys..

I have been programming my esc today. It stopped letting me finish programming it on step 5. So i finished programming with castle link. Now it won't recognise low stick until i pull sub trim all the way down. Tried to program tx to esc still no luck. Starting to give me the shits. Please help!

Sent from my GT-I9100 using Tapatalk

[sarpilot]

Originally Posted by helisrmylife

Hi guys..

I have been programming my esc today. It stopped letting me finish programming it on step 5. So i finished programming with castle link. Now it won't recognise low stick until i pull sub trim all the way down. Tried to program tx to esc still no luck. Starting to give me the shits. Please help!

Sent from my GT-I9100 using Tapatalk

Put subtrim back to 0 and use the main endpoint on the throttle channel to get it to see low stick. On spektrum it ends up being around 120 or so on both the 50 and 80. When you get the beeps add a couple more points down for safety. Don't forget to rebind RX after you get it all set up.....

[helisrmylife]

Sweet that did the trick. Very strange how new software can change things like that. Never had to do this before now

Sent from my GT-I9100 using Tapatalk

[sarpilot]