Satellite synchronization error

mtymyk · 07-04-2012, 06:26 AM

I've never seen this error on any of my other Vbars in the past, " Satellite Data out of Synchronization", however I have been getting tons on my logs. I am running latest firmware on Full size Blue and new Silverline sensor. I'm using a DSM2 DX7 and 2 DSMX satellites, bound as Specktrum Digital Center.
So far I have tried rebinding but the error continues to come up. Satellites are BN as are the cables. Any ideas? I have attached event log.

mtymyk · 07-04-2012, 12:32 PM

Anyone?

Sent from my iPhone 4S using Tapatalk

mtymyk · 07-05-2012, 10:32 AM

After much back searching, I have yet to see any posts regarding the specific " synchronization" error. After some more troubleshooting, I believe I solved the issue. Seems once I set my Jive from 6v to 5.6v on the bec , the error is no longer showing up.

... Nope, error is back, showed up on first flight

Sent from my iPhone 4S using Tapatalk

agagescu · 07-10-2012, 12:48 AM

This is just a shot in the dark since I haven't the foggiest what that error means, but have you tried re-binding?

Also seeing a lot of antenna switches... So it's either not liking your satellite placement, sat cable coming loose or a sat going bad.

MrMel · 07-10-2012, 01:45 AM

What heli?

mtymyk · 07-10-2012, 05:18 AM

I have tried rebinding several times, no difference. Also have repositioned the satellites, but error still shows up.
I have also tried different satellites and sat cables, neither made a difference. I am running DSM2 radio w/ DSMX satellites all bound to " Spektrum digital centre"
And Mr.Mel, heli is a Diabolo....

Sent from my iPhone 4S using Tapatalk

MrMel · 07-10-2012, 06:32 AM

Does it have belt?
Static is always a possibility

The error is new in 5.3 as the decoder was re-written but the error is the same as checksum error.

mtymyk · 07-10-2012, 07:12 AM

Ok thanks Mr.Mel, it is a belt, I'll check the ground on the boom, even give the ground a continuity test, I'll report back on testing.

Sent from my iPhone 4S using Tapatalk

07-04-2012, 12:32 PM	#2
mtymyk Registered Users Thread Starter Join Date: Jun 2010 Location: Brampton, Ontario, Canada	Anyone? Sent from my iPhone 4S using Tapatalk __________________ Logo600, 7HV, Goblin700, Goblin770 14s, Goblin 500 Vbar, Kontronik, JR, Scorpion Team Rotorquest Last edited by mtymyk; 07-05-2012 at 05:36 AM..

07-05-2012, 10:32 AM	#3
mtymyk Registered Users Thread Starter Join Date: Jun 2010 Location: Brampton, Ontario, Canada	After much back searching, I have yet to see any posts regarding the specific " synchronization" error. After some more troubleshooting, I believe I solved the issue. Seems once I set my Jive from 6v to 5.6v on the bec , the error is no longer showing up. ... Nope, error is back, showed up on first flight Sent from my iPhone 4S using Tapatalk __________________ Logo600, 7HV, Goblin700, Goblin770 14s, Goblin 500 Vbar, Kontronik, JR, Scorpion Team Rotorquest Last edited by mtymyk; 07-05-2012 at 05:45 PM..

07-10-2012, 01:45 AM	#5
MrMel V-BAR Guru Join Date: Apr 2005 Location: Lidingo/Stockholm, Sweden	What heli? __________________ Gone fishing.. or hunting or something.. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-10-2012, 05:18 AM	#6
mtymyk Registered Users Thread Starter Join Date: Jun 2010 Location: Brampton, Ontario, Canada	I have tried rebinding several times, no difference. Also have repositioned the satellites, but error still shows up. I have also tried different satellites and sat cables, neither made a difference. I am running DSM2 radio w/ DSMX satellites all bound to " Spektrum digital centre" And Mr.Mel, heli is a Diabolo.... Sent from my iPhone 4S using Tapatalk __________________ Logo600, 7HV, Goblin700, Goblin770 14s, Goblin 500 Vbar, Kontronik, JR, Scorpion Team Rotorquest

07-10-2012, 06:32 AM	#7
MrMel V-BAR Guru Join Date: Apr 2005 Location: Lidingo/Stockholm, Sweden	Does it have belt? Static is always a possibility The error is new in 5.3 as the decoder was re-written but the error is the same as checksum error. __________________ Gone fishing.. or hunting or something.. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-10-2012, 12:48 AM	#4
agagescu Registered Users My HF Map location Join Date: Jun 2010 Location: New York, New York	This is just a shot in the dark since I haven't the foggiest what that error means, but have you tried re-binding? Also seeing a lot of antenna switches... So it's either not liking your satellite placement, sat cable coming loose or a sat going bad.

07-10-2012, 07:12 AM	#8
mtymyk Registered Users Thread Starter Join Date: Jun 2010 Location: Brampton, Ontario, Canada	Ok thanks Mr.Mel, it is a belt, I'll check the ground on the boom, even give the ground a continuity test, I'll report back on testing. Sent from my iPhone 4S using Tapatalk __________________ Logo600, 7HV, Goblin700, Goblin770 14s, Goblin 500 Vbar, Kontronik, JR, Scorpion Team Rotorquest

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode