START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
550 Class Electric Helicopters 550 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
05-19-2012, 04:37 PM | #41 (permalink) |
Registered Users
Join Date: Apr 2010
|
airframe
v2 model/fbl align 550 mains and 90mm tails kde main thrusted bearings kde gyro mount align anti rotation bracket align tail servo mount power system scorpion hkIII 4025-1100 700 112 main slant m1 12t pinion thunderpower 65c 5000 6s yge 120lv w/heat sink electronics ds 610 cyclics s9256 tail western robotics super mini bec set to 6v fullsize vbar 5.2 pro using vbar gov flight notes 4:30 of mild 3d,funnels,hurricanes,tic tocs,piro flips.
__________________
600 DFC HV Pilot Brandon J. |
Sponsored Links | |||
Advertisement |
|
07-11-2012, 12:39 PM | #42 (permalink) |
Registered Users
|
My Trex 550
Airframe
__________________
Gaui X5v2 - Scorpion 4025-1100 | GAUI 100A | Protek 170SBL | Protek 270SBL | AR7200BX Gaui NX5 - O.S. Hyper 50 | Align DS530 | Align DS535 | AR7210BX Blade 180CFX | Zeal 155 Spektrum iX12 Last edited by hoelshot; 07-13-2012 at 07:31 PM.. |
07-23-2012, 09:22 AM | #43 (permalink) |
Registered Users
Join Date: Apr 2011
|
Airframe
__________________
T-Rex 550E V2 FBL / HC3-SX / X-Era 4020/2y 100kv / Jive 80+HV T8FG Super (Mode 2) dreaming about TD Rigid Last edited by insomnia; 08-02-2012 at 05:44 AM.. Reason: update |
07-26-2012, 07:07 AM | #44 (permalink) |
Registered Users
Join Date: Jun 2012
|
trex 550 vbar trouble!?
3 main cogs n 3 pair of tail blades later i still cant set up the vbar
its just the tail part, it looks correct of the ground, end points look right but when i spool it up and get it off the floor, it just wants to spin around in circles. ive tried reversing the rudder in the tx and on the vbar itself through the computer and it still wants to spin. i dont get it!? its vbar 5.2 and is the standard align tail servo for the 500e. |
07-26-2012, 07:30 AM | #45 (permalink) | |
Registered Users
|
Quote:
__________________
Align Trex 700 V3 DFC HV - Vcontol Touch ¦ Mikado Logo 200 ¦ SAB Kraken 580 ¦ Align Trex 500X ¦ Sab RAW 500 |
|
07-26-2012, 11:24 AM | #46 (permalink) | |
Registered Users
Thread Starter
|
Quote:
__________________
- Chris TJinTech heli...info...news...such Helis: TRex 450 Pro - Protos - TRex 550e Stuff: Spektrum DX7 - iCharger 208B - Hyperion G3 |
|
07-27-2012, 12:12 PM | #47 (permalink) |
Registered Users
Join Date: Jun 2012
|
sorry, i wrote this on my mobile n didnt notice it was in the wrong place, i ment to write 550 not 500 aswell.....ups
cheers raydee, ill look at that when my replacment parts come |
07-29-2012, 03:59 PM | #48 (permalink) |
Join Date: Nov 2007
|
8 degrees error - HELP!!
The swash plate is level - the swash arms are parallel (90 degrees) - the collective is at center stick (50% on the DX7) - the blade-holder connecting links are 80mm long (per the manual) but the blade holders have 8 degrees pitch instead of 0 degrees pitch.
What in the world am I doing wrong? |
07-29-2012, 09:34 PM | #49 (permalink) | |
Registered Users
|
Quote:
Make sure that you're using a linear pitch curve 0 to 100% Adjust the pitch links to give you 0 deg. The lengths in the manual are ball park values, in addition to some manuals having typo errors - make sure you check the link lengths in the Chinese text line. https://www.helifreak.com/showthread.php?p=3714219
__________________
SAB Goblin 700 - CCHV120 - BEC Pro - AR7200BX - TM1000 / 450 Pro - GT5 - Tarot head / T-Rex 550 V2.1 - CC100 - BEC Pro - AR7200BX - TM1000 / |
|
07-30-2012, 02:17 AM | #50 (permalink) |
Registered Users
Join Date: Apr 2011
|
Airframe
Last edited by diggyduo; 08-08-2012 at 01:44 AM.. |
07-31-2012, 07:45 PM | #51 (permalink) |
Registered Users
Join Date: Mar 2011
|
Airframe
__________________
MSH, Cyclone |
07-31-2012, 08:14 PM | #52 (permalink) |
Registered Users
Join Date: Jan 2006
|
I just got mine, used, from a friend, who builds beautifully! I had flown it before and liked it.
Airframe Kit: Stock FBL V1 Blades: Align 520mm Tail blades: KBDD 84.5mm EE's Landing gear: Stock Fins: Stock tail and no horizontal Canopy: Stock Power system Motor: Stock Align Gearing: Stock 170T main gear, stock 16T pinion ESC: CC Ice 100 RX power: WR Super Hercules BEC Main pack: Turnigy 5000 mah Electronics Cyclic servos: Align DS610 Tail servo: Align DS60 FBL Unit: AR7200BX Specs (flight notes) Flight style: Hard sport flying and 3D Head speed: have not tached it yet Flight time: 5min Amp draw: Have not measured it yet. Upgrades & mods TracX Head I am hoping to take it out and really fly it in the next couple of days (I just test hovered it a short time ago.
__________________
KBDD-Team Captain, JR DFA Team Pilot. Forza 450, Forza 600N, Forza 700, Compass 6HV-U, Warp, 7HV,Knight Pro,Knight 3D, Atom, Odin II, 6HV, 3D Plus, Knight 50, Chronos, Velos, Steam 550 and 600, OMP M2 (and anything else I can get my hands on...). |
10-02-2012, 04:01 PM | #53 (permalink) |
Registered Users
Join Date: Mar 2012
|
My build, nothing unusual here.
Airframe Kit: Stock FBL V2.1 Blades: Align 520mm Tail blades: Align Stock Tail Blades Landing gear: Stock Fins: Lynx 700 sized Orange Tail fin Canopy: Stock Power system Motor: Stock Align 600MX 1220KV Gearing: Stock 112T main gear, stock 11T pinion ESC: CC Ice 100 V2 RX power: CC BEC Pro V2 Main pack: Sky Lipo 4400 30c, Sky Lipo 4400 40c, Gens Ace 5300 30c Electronics Cyclic servos: Align DS610 Tail servo: Align DS650 FBL Unit: Skookum SK540 using 2 DSMX Sats. TX: DX18 (Just got it Sat.) upgraded from DX8. Specs (flight notes) Flight style: Sport Flying currently, working up to inverted. Head speed: 2400-2500rpm at 90% flat curve. Flight time: 6min on all packs above. They come down with 3.77-79 volts per cell on average. Amp draw: avg of 45-55amps. Upgrades Tarot 2mm side frames and bottom plate. That's it!! |
10-07-2012, 02:52 AM | #54 (permalink) |
Registered Users
|
Love machine
Airframe Kit: Stock FBL V1 Blades: NHP 530mm Tail blades: Align 90mm Landing gear: HT Unbreakable Fins: Lynx Orange Tail fin Canopy: Canomod Smash Power system Motor: KDE 600XF 1175kv Gearing: Stock 170T main gear, 17T pinion ESC: YGE 100LVVB RX power: internal BEC Main pack: Zippy 4500mAh 45C Electronics Cyclic servos: Futaba BLS451 Tail servo: Futaba BLS251 FBL Unit: Vbar blueline fullsize Governor: Vbar using YGE built-in phase sensor TX: DX8 Specs (flight notes) Flight style: Some kind of 3D Head speed: 2100-2500 rpm Flight time: 4.5min, about 30% left Amp draw: ? Upgrades Align DFC head (w v2 blade grips) Lynx main shaft bearing block KDE front gyro plate KDE anti-rotation bracket QuickUK magnetic canopy lock (T600N) White paint other "unnecessary" upgrades: KDE battery plate KDE frame boom support brace KDE tail fin holder KDE tail servo holder MicroHeli boom support holder MicroHeli tail link support Align aluminium tail-pitch arm Home-made boom support stiffener (Belt drive, haven't mounted it yet)
__________________
550E, X3 | BeastX, YGE, DX8 http://dannesholk.se/rc.shtml |
12-17-2012, 01:27 PM | #55 (permalink) |
Registered Users
|
Airframe
Kit: Stock FBL V2 Blades: align 520 mm tail blades: Align 90mm Fins: Lynx Orange Tail fin Canopy: stock Power system Motor: KDE 600mX 1220kv Gearing: Stock 112T main gear, 11T pinion ESC: cc 100 RX power: cc pro BEC Main pack: pulse 5000mAh 45C Electronics Cyclic servos: Futaba BLS255 Tail servo: Futaba BLS256 FBL Unit:futaba cgy 750 V1.3 Governor: internal cc TX: futaba 18mz Specs (flight notes) Flight style: forward flight someday moving up to 3D yessssss Head speed: 1950-2150-2300 rpm Flight time: 7 min Amp draw: ? Upgrades Align DFC head (w v2 blade grips) Lynx main shaft bearing block Lynx Frame plates KDE front gyro plate KDE anti-rotation bracket KDE battery plate KDE frame boom support brace KDE tail servo holder MicroHeli boom support holder MicroHeli tail link support Align aluminium tail-pitch arm __________________
__________________
Futaba 18 mz, CGY 750, Kontronik esc, BK, Torq or futaba servos, align 550 dfc, align 600n dfc, align 700n dfc, Sab Goblin 500, Sab Goblin 630, Sab Goblin 700,Sab Goblin 700 Comp, Sab Goblin 770. |
12-27-2012, 10:22 PM | #56 (permalink) |
Registered Users
Join Date: Nov 2006
|
Airframe
Kit: Align V2 Blades: Mavrikk 2Q G5 PRO 515mm WC Flybarless Tail blades: Stock Landing gear: Align 700 FC3 Fins: Stock X's 2 Canopy: Canomod Power system Motor: KDE 600XF-1175kv Gearing: KDE 700 115t main gear & RevCo 13t pinion ESC: Jive 80HV Main pack: Ultra Pulse 6s 5000mAh 45C Bec: WR BEC Pro Electronics Cyclic Servos: Align DS610 @ 6v Tail servo: Futaba BLS251 FBL: Vbar Radio and RX Futaba 18mz R6302SB Specs (flight notes) Flight style: Sport/Mild 3D Head speed: Governed 2300/2500rpm Flight time: 4 min Upgrades & mods Fusano 2mm Frames Align DFC Head and Swash Align Dual Point Attachment Tail Slider KDE Verticle Stabilizer & Tray KDE Performance Tail Upgrade V2
__________________
Team Self MKS Servo USA ManiaX Lipos |
12-31-2012, 07:34 PM | #57 (permalink) |
Registered Users
Join Date: Dec 2012
|
My Chopper
here it is..
Airframe Stock out of box Align Trex 550E V2 3GX Power System Stock Motor Electronics Stoock speed controlr, castle cc bec, stock head servos, savox SH-1290MG tail servo, Venom 50c 5000, Specrtrum DX6i with ar7610 reciever Specs Set up for intermidate to advanced Stock blades stock head Upgrades Savox 1290mg tail servo Aluminum tail servo mount glued two stock tail blades together for less vibration |
01-12-2013, 10:50 AM | #58 (permalink) |
Registered Users
Join Date: Sep 2011
|
Re: TRex 550e setups, specs and upgrades
Glued two stock tail blades together ? How do u mean
|
01-12-2013, 11:05 AM | #59 (permalink) |
Registered Users
Join Date: Aug 2010
|
I think he means two vertical tail fins.
__________________
HD750, TDR II, TDR, Logo 700, Logo 700 XXtreme, Logo 550SX V2 |
03-01-2013, 11:37 AM | #60 (permalink) |
Registered Users
Join Date: Jul 2012
|
TRex 550e setups, specs and upgrades
Airframe: Trex 550e
V1 stretched 600 boom Aluminum lipo tray (tarot) Aluminum AR bracket CF UK tail push rod 600 tail grips Servos: DS610's cyclic DS655 tail ESC: Talon 90 ( using internal BEC) 6v And 4" extension wires with 4mm bullets to 5mm bullets Motor: BL600MX 1220kv (6s setups) Gyro: AR7200BX w/ dsmx sat Telem: TM-1000 w/ lipo voltage & motor temp Soon head speed sensor Blades: RJX 520's / Edge 553's Gearing: Main gear 170 tooth Pinion. 17 tooth Lipos: 6s 4500 mah 30c TX: DX8 ( I love it) wayyyyyy better than my previous DX6i. NANO CPX,TREX 500e,TREX 550 FL STRETCHED DX8 W/TELEM
__________________
TREX 700 Pro, TREX 700LTop, GauiX3, Futaba 14SGH |
Thread Tools | |
Display Modes | |
|
|