Lynx Heavy Duty Clutch LX0015

[rc51pete]

I'm needing a new clutch & was looking at the Lynx LX0015. I'm having a problem finding one. Does anybody know where I can get one or have any other clutch recommendations?

[Rob43]

==

[Dawiev]

Seems Align upgraded the 600 clutch somewhere around 2012 and have been good since. Perhaps the reason why Lynx discontinued LX0015.

Only "must do" since then is to use the blue clutch liner.

[meowguy]

I you already know this just disregard, but you need to make sure any new clutch put in has the proper gap between the shoes and the lining. The correct gap would be .010" space all around. When measuring diameter. The outside diameter of the shoes should be .020 smaller than the inside diameter of the lining. Local machine shops can machine the inside of the lining to this tolerance. Sure, others will say .015 but anywhere between .015 and .020 will do nicely.

[rc51pete]

Thank you for the replies. I think I'm going to just get the stock clutch with blue liner and use electical tape around the hub to help set the gap while the glue dries.