START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Open Source Flight Controllers (CC3D, Ardupilot, etc.) Open Source Flight Controllers (CC3D, Ardupilot, etc.) |
|
LinkBack | Thread Tools | Display Modes |
12-21-2015, 02:45 PM | #1 (permalink) |
Registered Users
Join Date: Dec 2009
|
CC3D Sat recievers
Hi
This is my first qad build I ordered a "Kit" all the parts on one box wth no instructions I have the frame assembled all the soldering done and I am looking into the CC3D set up, a lot of the links on OpenPilot.org seem to be dead. The one I have is this one https://www.rotorquest.com/index.php...duct_id=105383 on he bottom there are 2 plugs that saw Sat DSM2/DSMX does this mean I can just plug a sat in and no have to use a receiver? I figure I would have to bind it to a receiver then install it like I did with my Robird on my 450. please let me know if I am correct on this. now I have to search my hose for a USB cable Thanks C
__________________
C Blade 230S, Nano cpx, nano qx/3dqx/fpv, 200qx MCPX V2, Align Trex 250, 250 DFCplus, Trex 450 plus,Trex 500, JR Forza 450, and more I retired |
Sponsored Links | |||
Advertisement |
|
12-28-2015, 09:14 PM | #2 (permalink) |
Registered Users
|
Check out "Librepilot". They picked up where "openpilot" left off. Here is a link to some information https://librepilot.atlassian.net/wik...t/view/4128774
If you need more let me know I have more on my computer. Just completed my 250 Quad-X and it flies great. Lots of options for your flying style and you can change them as you grow.
__________________
Tom |
12-29-2015, 03:31 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Dec 2009
|
Great thanks
its weird I have to of the CC3D's in the same packaging one has the plugs for the sat receivers one does not,,, owell one at a time, hopeing to get it programmed in the enxt couple of days once I acquire some more heat shrink,
__________________
C Blade 230S, Nano cpx, nano qx/3dqx/fpv, 200qx MCPX V2, Align Trex 250, 250 DFCplus, Trex 450 plus,Trex 500, JR Forza 450, and more I retired |
01-21-2016, 04:04 AM | #4 (permalink) | ||
Registered Users
Join Date: Nov 2012
Location: Wichita,KS
|
this was the method I used although I pre bound up my satellite using a ikon fbl controller
__________________
|
||
03-06-2016, 08:10 PM | #5 (permalink) |
Registered Users
Join Date: Jan 2011
|
What you have is one of the CC3D EVO controllers with the two Spektrum satellite ports. If you don't have another receiver or FBL unit to pre bind the satellite, you can bind using the CC3D as outlined in the video. You must use the Flexi port to bind but once bound , you must switch it to the main port for flight.
__________________
I don't care what you fly, just FLY! |
Thread Tools | |
Display Modes | |
|
|