Register Now

rfequity1 · 09-04-2008, 10:23 AM

I believe this is called the "Todd Bennett Special". Any problems using these together? Is this an ok pipe?

Kinger · 09-04-2008, 10:40 AM

That pipe really was created for use with the YS91ST. Not sure if it will mount correctly to the SZ and if it does the motor probably won't run as well as it would on a SB18.

rfequity1 · 09-04-2008, 01:26 PM

Ok. So I went to the LHS at lunch and bought Hatori SB-17FH-2. Will this work ok for OS91SZ?

rfequity1 · 09-05-2008, 11:30 AM

Can someone please advise me if the SB-17FH is ok with the OS91SZ?

jet22b · 09-05-2008, 11:40 AM

Quote:

Originally Posted by rfequity1

Can someone please advise me if the SB-17FH is ok with the OS91SZ?

On my T-Rex 700N, I am using the OS91SZ with SB-18FH pipe from Hatori. Over 25 flight with this setup and I just love it.
Also check your box and if it say that this pipe will fit the C-Spec & SZ, than you are okay!!!
Hope that help!!

jet22b

rfequity1 · 09-05-2008, 02:42 PM

Also check your box and if it say that this pipe will fit the C-Spec & SZ, than you are okay!!!
Hope that help!!

jet22b[/quote]

Yes it does say that. Thanks for your help.

HeliSmith · 09-05-2008, 08:10 PM

In my research... It will fit and run on your motor but it isn't optimally tuned for max power on that motor. It is tuned for a lower RPM. You want an SB18FH.

09-04-2008, 10:23 AM	#1 (permalink)
rfequity1 Join Date: Jan 2008	os 91sz with Hatori SB-16FH I believe this is called the "Todd Bennett Special". Any problems using these together? Is this an ok pipe?

09-05-2008, 08:10 PM	#7 (permalink)
HeliSmith Registered Users My HF Map location Join Date: May 2007	In my research... It will fit and run on your motor but it isn't optimally tuned for max power on that motor. It is tuned for a lower RPM. You want an SB18FH. __________________ r/c helis lifestyle

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-04-2008, 10:40 AM	#2 (permalink)
Kinger Registered Users My HF Map location Join Date: Apr 2004	That pipe really was created for use with the YS91ST. Not sure if it will mount correctly to the SZ and if it does the motor probably won't run as well as it would on a SB18.

09-04-2008, 01:26 PM	#3 (permalink)
rfequity1 Thread Starter Join Date: Jan 2008	Ok. So I went to the LHS at lunch and bought Hatori SB-17FH-2. Will this work ok for OS91SZ?

09-05-2008, 11:30 AM	#4 (permalink)
rfequity1 Thread Starter Join Date: Jan 2008	Can someone please advise me if the SB-17FH is ok with the OS91SZ?

09-05-2008, 02:42 PM	#6 (permalink)
rfequity1 Thread Starter Join Date: Jan 2008	Also check your box and if it say that this pipe will fit the C-Spec & SZ, than you are okay!!! Hope that help!! jet22b[/quote] Yes it does say that. Thanks for your help.

Register Now

Log-in