Register Now

cptfurz · 07-05-2007, 03:28 PM

Hi Folks
I have a JR 2720 Tx/Rx and am trying to setup the pitch control on one of the rocker switches independent from the throtle. I am not running on CCPM mode. Can some one help me with the setup?

cptfurz · 07-15-2007, 01:41 PM

I am replying to my own question since I did not receive any reply and I had to do some digging.

The reply was in the US version of JR2720 i.e. the manual of JR7202. It seems that this manual contains more info while the two models are almost the same (the only differnces are that Throtle Hold & Aux 2 / Gear & Flight mode switches are in oposite positions)

Well the answer is in the Throttle Hold function which has to be enabled. Further the Pitch Rocker and the hover throttle rocker will not work if the flight mode switch is not in the normal position.

More details in the manual.

07-05-2007, 03:28 PM	#1 (permalink)
cptfurz Join Date: Jul 2007	JR2720 - PITCH CONTROL Hi Folks I have a JR 2720 Tx/Rx and am trying to setup the pitch control on one of the rocker switches independent from the throtle. I am not running on CCPM mode. Can some one help me with the setup?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2007, 01:41 PM	#2 (permalink)
cptfurz Thread Starter Join Date: Jul 2007	I am replying to my own question since I did not receive any reply and I had to do some digging. The reply was in the US version of JR2720 i.e. the manual of JR7202. It seems that this manual contains more info while the two models are almost the same (the only differnces are that Throtle Hold & Aux 2 / Gear & Flight mode switches are in oposite positions) Well the answer is in the Throttle Hold function which has to be enabled. Further the Pitch Rocker and the hover throttle rocker will not work if the flight mode switch is not in the normal position. More details in the manual.

Register Now

Log-in