Register Now

jabo5778 · 04-29-2009, 01:31 AM

Looking to do a HV setup somewhere down the road. Considering 8s, cc110, scorpion HK-4035-800 and 16 tooth pinion. Question is the 800kv version has an 8mm shaft, the others have the 8mm that is ground down to 6mm at he pinion end.... where can I get a 8mm inner diameter pinion for this motor??

Thanks guys
Dave

teshreve · 04-29-2009, 01:54 AM

Dave, any specific reason for the 4035 vs. the 4025?
I am currently running a 4025 740kv motor w/ a 17 tooth pinion on 8s 4200 packs.
The output on the 4025 motors is 5mm and 6mm on the 4035 motors. Both motors have 8mm shafts but are cut down at the end for the pinion, so you don't need an 8mm pinion.
You can buy 5mm and 6mm shafts for both motors directly from http://innov8tivedesigns.com
Such as this: http://www.innov8tivedesigns.com/pro...c475b99e854840

My setup has crazy awesome power and 5:30 run times. 6 minutes with a flat 90% throttle curve. I honestly don't think you need the 4035 series motors. They are just huge for a 600.

04-29-2009, 01:31 AM	#1 (permalink)
jabo5778 Registered Users My HF Map location Join Date: Dec 2008	scorpion pinion?? Looking to do a HV setup somewhere down the road. Considering 8s, cc110, scorpion HK-4035-800 and 16 tooth pinion. Question is the 800kv version has an 8mm shaft, the others have the 8mm that is ground down to 6mm at he pinion end.... where can I get a 8mm inner diameter pinion for this motor?? Thanks guys Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-29-2009, 01:54 AM	#2 (permalink)
teshreve Registered Users My HF Map location Join Date: Jun 2007	Dave, any specific reason for the 4035 vs. the 4025? I am currently running a 4025 740kv motor w/ a 17 tooth pinion on 8s 4200 packs. The output on the 4025 motors is 5mm and 6mm on the 4035 motors. Both motors have 8mm shafts but are cut down at the end for the pinion, so you don't need an 8mm pinion. You can buy 5mm and 6mm shafts for both motors directly from http://innov8tivedesigns.com Such as this: http://www.innov8tivedesigns.com/pro...c475b99e854840 My setup has crazy awesome power and 5:30 run times. 6 minutes with a flat 90% throttle curve. I honestly don't think you need the 4035 series motors. They are just huge for a 600.

Register Now

Log-in