Register Now

adam crosby · 09-27-2008, 05:43 PM

finally found some main gear for people who have trouble buying ark helimax 400 main gear.

ESky cp honey bee main gear

this works fine, all you have to do is remove the bearing from the x400 gear and glue it in the esky cp honey bee main gear hole, fits perfectly. works fine

Stableblade · 10-25-2008, 09:00 PM

A Blade 400 gear can be fitted with some minor work. It's for a larger heli.

SB

Heli_Flight · 04-19-2010, 11:57 PM

I've been interchanging my Align Trex 450SA (same as se) gear. the main shaft is the same diameter and length. You could even swap out complete rotor head systems. Just make sure you use the correct swashplate 90/120 degree, for your control sysetem.

09-27-2008, 05:43 PM	#1 (permalink)
adam crosby Registered Users Join Date: Jun 2007	alternative main gear for x400/mx400!! finally found some main gear for people who have trouble buying ark helimax 400 main gear. ESky cp honey bee main gear this works fine, all you have to do is remove the bearing from the x400 gear and glue it in the esky cp honey bee main gear hole, fits perfectly. works fine Attached Thumbnails

10-25-2008, 09:00 PM	#2 (permalink)
Stableblade Registered Users Join Date: Oct 2006	A Blade 400 gear can be fitted with some minor work. It's for a larger heli. SB __________________ If it's critical, don't worry about it, as long as it fits in the circle of certainty defined by absolute precision, it's more than approximately exact.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-19-2010, 11:57 PM	#3 (permalink)
Heli_Flight Registered Users Join Date: Jun 2007	I've been interchanging my Align Trex 450SA (same as se) gear. the main shaft is the same diameter and length. You could even swap out complete rotor head systems. Just make sure you use the correct swashplate 90/120 degree, for your control sysetem.

Register Now

Log-in