s1000 - Futaba 14SG causing FPV interference

[mjeagent]

Tonight I experienced some significant feedback/interference on my FPV monitor when I would turn on my Futaba RX. Here is a short video showing the clear video image before and then how it looks after I turn on the receiver -

http://vimeo.com/user27192781/review...139/c3a75fcf35

I lose the FPV signal completely at about 100 ft. Not sure what the problem is. I've also included two pictures - one of the Futaba RX and the other of the FPV transmitter on the s1000.

[mjeagent]

Anybody?

[ErichF]

Are you using a Telemetry receiver system?

[mjeagent]

Yes, it does have telemetry data.

[wargor]

I have a TBS Discovery Pro using an 18mz and 7008 receiver. I am able to go over 1/2 mile with no interference problems. I am using 5.8 for video. Clear as can be going out far. maybe telemetry could be the issue. I'm not using any telemetry from the receiver. I get all of that through the goggles.

[rcjames]

Time to use the top of the line radio. That most fpv user use. Frsky Taranis with Accst technology.

[setishock]

That's a transmitter you're turning on and off. It could be as simple as the wiring or the monitor itself is picking up the signal from the transmitter. If that's not the case try switching channels on the FPV gear.