Register Now

Magneto · 05-01-2012, 07:50 AM

I love my E7 and am thinking of building an E6 im going to use TP 3850s with a pyro like my E7 what kind of AUW are you guys getting I know its on the heavy side for a 600 but I think ill use 620mm blades to lighten the disc, also with the packs I have selected are there any cg issues ?

beeflyer2 · 05-01-2012, 08:20 AM

I run Gens Ace 12S 4000s and my AUW is somewhere around 9.5 lbs. CG is not a problem because you can easlily slide the packs fore/aft to compensate. I run the same packs in E7 configuration and position them further forward to balance.

Weule · 05-01-2012, 10:36 AM

I ran the same packs in 3300 as an E6

For my taste 600 blades were too loaded so I moved to 620's - much better.

I would keep the E6 as light as possible.

OnTheSnap · 05-03-2012, 02:43 PM

Will it fit RotorTech 640's?

Weule · 05-03-2012, 05:27 PM

Hmmm - E6 on 640's. If they fit it might be an excellent combo.

The E6 is certified to 630 but there is a decent chance 640's will fit. I tried to locate a set prior to converting to an E7 but couldn't find them in stock...

Hopefully someone will try and let us know...

OnTheSnap · 05-04-2012, 02:53 AM

I tried a set for 3 flights on a Heli I was testing. Seemed really nice until I had a boom strike.

Century is local and you get get them at their shop in San Jose. They have a store front.

acidla · 05-05-2012, 01:00 PM

I am planning on using the V2 Radix 625mm.

05-01-2012, 07:50 AM	#1 (permalink)
Magneto Registered Users Join Date: Jan 2010 Location: Massachusetts	Synergy E6 questions I love my E7 and am thinking of building an E6 im going to use TP 3850s with a pyro like my E7 what kind of AUW are you guys getting I know its on the heavy side for a 600 but I think ill use 620mm blades to lighten the disc, also with the packs I have selected are there any cg issues ?

05-03-2012, 02:43 PM	#4 (permalink)
OnTheSnap Registered Users Join Date: Jan 2009 Location: NorCal	Will it fit RotorTech 640's? __________________ Xpert Scorpion Power Systems Helidirect

05-04-2012, 02:53 AM	#6 (permalink)
OnTheSnap Registered Users Join Date: Jan 2009 Location: NorCal	I tried a set for 3 flights on a Heli I was testing. Seemed really nice until I had a boom strike. Century is local and you get get them at their shop in San Jose. They have a store front. __________________ Xpert Scorpion Power Systems Helidirect

05-05-2012, 01:00 PM	#7 (permalink)
acidla Registered Users Join Date: Jul 2007	I am planning on using the V2 Radix 625mm. __________________ \|Michalis\| ...let the flying be second nature!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2012, 08:20 AM	#2 (permalink)
beeflyer2 Registered Users Join Date: May 2006 Location: Woodstock, GA	I run Gens Ace 12S 4000s and my AUW is somewhere around 9.5 lbs. CG is not a problem because you can easlily slide the packs fore/aft to compensate. I run the same packs in E7 configuration and position them further forward to balance.

05-01-2012, 10:36 AM	#3 (permalink)
Weule Registered Users My HF Map location Join Date: Sep 2010 Location: Norcal	I ran the same packs in 3300 as an E6 For my taste 600 blades were too loaded so I moved to 620's - much better. I would keep the E6 as light as possible.

05-03-2012, 05:27 PM	#5 (permalink)
Weule Registered Users My HF Map location Join Date: Sep 2010 Location: Norcal	Hmmm - E6 on 640's. If they fit it might be an excellent combo. The E6 is certified to 630 but there is a decent chance 640's will fit. I tried to locate a set prior to converting to an E7 but couldn't find them in stock... Hopefully someone will try and let us know...

Register Now

Log-in