Register Now

laz51 · 06-04-2008, 07:05 PM

I am buying a 450SA to learn 3D LOL so I don't break my T600N I need to know is anyone using any of the DS75 digtal servos or any of the new micro Digtal servos and has any one used a efligh 110 mirco gyro or any of the mirco gyros . Thanks

george0079 · 06-04-2008, 07:08 PM

Do your self a favor and get the HS65MG servos, and a 401/9257 gyro combo. If you're going to start learning 3D, you're gonna want some quality equipment that can take some abuse

carlo_the_wonder_frog · 06-04-2008, 07:32 PM

Quote:

Originally Posted by george0079

Do your self a favor and get the HS65MG servos, and a 401/9257 gyro combo. If you're going to start learning 3D, you're gonna want some quality equipment that can take some abuse

+1

helijack · 06-04-2008, 10:35 PM

Do yourself, and your T-Rex, a big favour!....stay away from the micro gyros like the 110 and the like. They just don't cut it on the 450. The 401 is the way to go, and even the 9650 is a great servo.
And don't forget the 65MG servos for the cyclic!

Brandon3D · 06-05-2008, 01:04 AM

ya on my trex 450 v2 i got 65 mg servos with 401 gyro 9257 tail servo, dx7, stock 430XL motor and the 35X 6V bec, kong power 2200 3 cell lipos.

Brandon.

FlyingHigh 450 · 06-05-2008, 04:02 AM

Quote:

Originally Posted by laz51

I am buying a 450SA to learn 3D LOL so I don't break my T600N I need to know is anyone using any of the DS75 digtal servos or any of the new micro Digtal servos and has any one used a efligh 110 mirco gyro or any of the mirco gyros . Thanks

Theres nothing wrong with the eflight 110 gyro,it holds just as good if not better than the Futaba gy240,so any of these 3 gyros " eflight 110,gy240 and gy401" are very good for 3D.For The tail the Futaba S9650 is made for the 400-450 class helis.Them DS75 servos are junk,get some Hitec HS-65HB's or HS-65MG's for the cycle

.

Tom Burgess · 06-05-2008, 05:06 AM

Dont forget there is also the CSM SL420e gyro aswel. Aswel as great hold it has limit settings for each deflection rather than a single pot and is generally a newer design than the older 401.

TPOG · 06-05-2008, 02:32 PM

The Logictech 2100T gyro is working great for me.

I also recommend the 65 MG servos, very good/tough

ChasHeliCop · 06-05-2008, 03:49 PM

HS65MG Cyclic
401 / 9650

Proven performance.

Nutsinboltz27 · 06-05-2008, 04:04 PM

I run HS65MG, 401 9650 combo here also. Been great for me so far

No 3D but Ive seen other pilots rock the 450 with this combo.

carlo_the_wonder_frog · 06-05-2008, 07:44 PM

check sig

06-04-2008, 07:05 PM	#1 (permalink)
laz51 Registered Users Join Date: Dec 2006	Help!! buying 450SA what servos & gyro I am buying a 450SA to learn 3D LOL so I don't break my T600N I need to know is anyone using any of the DS75 digtal servos or any of the new micro Digtal servos and has any one used a efligh 110 mirco gyro or any of the mirco gyros . Thanks

06-04-2008, 07:08 PM	#2 (permalink)
george0079 Registered Users My HF Map location Join Date: Sep 2007	Do your self a favor and get the HS65MG servos, and a 401/9257 gyro combo. If you're going to start learning 3D, you're gonna want some quality equipment that can take some abuse __________________ If, at first, you don't succeed, then skydiving is probably a bad idea for you.

06-04-2008, 10:35 PM	#4 (permalink)
helijack Registered Users My HF Map location Join Date: Apr 2007	Do yourself, and your T-Rex, a big favour!....stay away from the micro gyros like the 110 and the like. They just don't cut it on the 450. The 401 is the way to go, and even the 9650 is a great servo. And don't forget the 65MG servos for the cyclic! __________________ T-Rex 450 SE V1, HS65MG, 9650, 325 CF, AR6100, 2200 FlightMax, 430XL/BL35X, GY401 ...SOLD T-Rex 500ESP...SOLD DX7...Still for sale M.A.A.C. 78596 www.helicalgary.com Ex President - Calgary RC Heli Club

06-05-2008, 03:49 PM	#9 (permalink)
ChasHeliCop HF Support My HF Map location Join Date: May 2007	HS65MG Cyclic 401 / 9650 Proven performance. __________________ Sponsored by Visa/MasterCard / Team Budweiser / Trojan Field Rep Donut Connoisseur HELI-FREAK, You couldn't have picked a better place to land !

06-05-2008, 04:04 PM	#10 (permalink)
Nutsinboltz27 Registered Users My HF Map location Join Date: Apr 2008	I run HS65MG, 401 9650 combo here also. Been great for me so far No 3D but Ive seen other pilots rock the 450 with this combo. __________________ Trex 600N OS55HZ-R Funtech Pipe Edge Blades Edge Tails Edge Paddles BLS 451 cyclics BLS 251 tail Gy701 gyrogov JR DS9411 Throttle Spectrum AR8000 Arizona Fromeco Switchglow Pro FlightPower EonX Lite 2500 Trex 450,Thanks Marv!

06-05-2008, 01:04 AM	#5 (permalink)
Brandon3D Registered Users My HF Map location Join Date: Apr 2007	ya on my trex 450 v2 i got 65 mg servos with 401 gyro 9257 tail servo, dx7, stock 430XL motor and the 35X 6V bec, kong power 2200 3 cell lipos. Brandon.

06-05-2008, 05:06 AM	#7 (permalink)
Tom Burgess Registered Users My HF Map location Join Date: Oct 2007	Dont forget there is also the CSM SL420e gyro aswel. Aswel as great hold it has limit settings for each deflection rather than a single pot and is generally a newer design than the older 401.

06-05-2008, 02:32 PM	#8 (permalink)
TPOG My HF Map location Join Date: Dec 2007	The Logictech 2100T gyro is working great for me. I also recommend the 65 MG servos, very good/tough

06-05-2008, 07:44 PM	#11 (permalink)
carlo_the_wonder_frog Registered Users My HF Map location Join Date: Apr 2006	check sig __________________ I have a few Heli's.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in