VControl switches / RF7.5 edition?

[zr1100]

Any advice re these 2 versions of RF7.5, when planning to use Vcontrol?
1. http://www.realflight.com/products/gpmz4524.html (wireless edition)
2. http://www.realflight.com/products/gpmz4525.html (trans. interface ed.)

Can same switch locations be used (rescue/motor/etc.) as already programmed in radio for flying your RC models?

Thanks

[torqeroll]

im interested , any info ??

[MrXYZ]

You want the transmitter interface edition and the Mikado wireless sim interface. Have this combo and works great. Only bummer is have to physically push reset button on Real Flight module after crash, but only once per session. So mount it where it's easy to get to.

[CaptHal8HS]

I too am interested in using RF 7.5 with my VControl radio. I currently run Phoenix and I think that there are better sims out there.
I am on a Mac with no CD drive; running Windows 10 under Parallels. Phoenix runs just fine. I could get the interface module from Mikado and be done but I want to try another sim.
Will Real Flight 7.5 run in a VM under Parallels? If you don't have a CD, is there any way to get the software online?
Thanks.

[shadco]

Originally Posted by MrXYZ

You want the transmitter interface edition and the Mikado wireless sim interface. Have this combo and works great. Only bummer is have to physically push reset button on Real Flight module after crash, but only once per session. So mount it where it's easy to get to.

Is there a how to set up the TX anywhere?

I am able to get it connected but can't seem to complete assign and calibrate.

.

[HeliSoCal]

anyone know how to get throttle hold to work correctly? It only works if I hold the switch up and not in the middle position.