Register Now

The Steve-O · 02-01-2009, 09:44 PM

Has anyone used a Mini-Ac 1215/20 motor in the blade cp? I have one waiting for for a use, and it sounds like it would power the blade well. It's a 3550kv motor, so I would use a larger pinion than what is used with the eflite 4100.

helidude3 · 02-02-2009, 11:10 PM

nope, not that i have heard of. Try it though, it will probably work.

The Steve-O · 02-04-2009, 04:15 PM

I will run either a 12 or 13 tooth pinion to match the headspeed of the eflite 370, and this motor should be harder to bogg anyway.

helidude3 · 02-04-2009, 04:55 PM

well, worth a try

02-01-2009, 09:44 PM	#1 (permalink)
The Steve-O Registered Users Join Date: Sep 2008	Brushless motor question Has anyone used a Mini-Ac 1215/20 motor in the blade cp? I have one waiting for for a use, and it sounds like it would power the blade well. It's a 3550kv motor, so I would use a larger pinion than what is used with the eflite 4100. __________________ Blade Cp, T-Rex 450 Se V2.75 (mikado head, beam swash and tail, 7200BX), Airwolf 450sa, Blade mCx, mCPx, mSR, Cx2, Swift, Havoc Heli

02-04-2009, 04:15 PM	#3 (permalink)
The Steve-O Registered Users Thread Starter Join Date: Sep 2008	I will run either a 12 or 13 tooth pinion to match the headspeed of the eflite 370, and this motor should be harder to bogg anyway. __________________ Blade Cp, T-Rex 450 Se V2.75 (mikado head, beam swash and tail, 7200BX), Airwolf 450sa, Blade mCx, mCPx, mSR, Cx2, Swift, Havoc Heli

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-02-2009, 11:10 PM	#2 (permalink)
helidude3 Registered Users My HF Map location Join Date: Jan 2009	nope, not that i have heard of. Try it though, it will probably work.

02-04-2009, 04:55 PM	#4 (permalink)
helidude3 Registered Users My HF Map location Join Date: Jan 2009	well, worth a try

Register Now

Log-in