3GX, is yours working great?

[ElektroTrainerS]

Hi,
someone should send a link of this poll to an ALIGN representative in Taiwan - they will be happy (like I´m happy too with my 3GX V3.1)

[Waxweazle]

Before 2.1 i did not like it.
2.1 was better but with back drift.
And after 3.0 it was great with no more drift and it felt good and stable. Over 200 flights now and i love it on my 450 pro.
But i have no experience with other systems.

Sent from my GT-I9300 using Tapatalk 4 Beta

[Tinker]

Working great on my 250 Pro DFC after 200+ flights. Just a sport flyer but it flys beautifully with the 3GX, CC10 and DSM2 remote RX. I did swap in a spare 3GX when it looked like I had problems with the original 3GX but I haven't had a chance to bench test the suspect unit so it may be fine.

Changed to an SK720 on my 500 EFL and converted to FBL on my B400 with SK720 to take advantage of SL feature.

[004ustamok]

year and a half and solid as rock!

[tfrotor]

mine as always work great,3.0 was a fenicky at left off but the
lastest update is best it's ever been

[flythk]

Working Great in 450 SE2 and 450 Pro V2, about 100 flights between the two. Running 3.1.

[escsniper]

Got two, and both are running fabulously!

[maverickk]

One 4 months old = 120 flights on a 450ProV2 DFC, One 1 month old on another 450ProV2 = 20 flights. Both are rock solid and I love the way they perform. I bought a third one, used, and will be installing this one soon in a 480Pro 6S Tarrot. All running on version 3.0.

[razeyoshi]

My 3GX finally came in and I just finished a test hover with a few collective pumps. So far I am impressed after just the initial set-up. Tail holds great and at a hover it feels like I can let off the controls. Ver 3.0 and on a Fusion 50 by the way...

Still need to see if it starts to do anything funky when I start to push it a little, like other forums have said...

[Rotorexploder]

I have 3 working great on 3.0. I'm still running a 3G on a T-550. All 4 are very nice, and I can't imagine how they could fly any better.

[bad007]

Originally Posted by ElektroTrainerS

Hi,
someone should send a link of this poll to an ALIGN representative in Taiwan - they will be happy (like I´m happy too with my 3GX V3.1)

Make to mistake they monitor this forum, so I've been told. One thing they changed due to monitoring was the control rates, to many posts on how to tame down the twitchy cyclic

[Pat Guit]

I have 3 and they are all working great.

[razeyoshi]

The poll numbers are actually better than what it shows. Just realized you can only vote 1 time. Not by how many helis you own. Sorry about that...

[Jackass1277]

My transition from fb to fbl was on a 3gx. Hands down they work. There was some issues in the very beginning but out of the dozen or so I've been thru. Never had a in flight reset or failure. I gotta be honest because of all the bad plubicity the 3gx is now cheap and I always keep and extra incase something screws up on any of my other fbl controllers

[peiyuhuang]

I have 2 and both are all working great.

[ktm520]

Originally Posted by peiyuhuang

I have 2 and both are all working great.

Same here

[MikeOgan]

No problems works great, had it almost a year

[flyul1]

I have 7 3GX units flying on 3 on Furion 450s 2 on Furion 6s and 2 on T Rex 600s they all perform awesome. I have no issues with them. The software just keeps getting better.I fly hard 3d and big air. I am looking forward to V4.0.

[joeray]

Working great for me.I fly mild to hard 3D.
450 is running version 4.0; 600 & 700 running version 3.1. Will upgrade those soon.

[jetblue2135]

I have one on my 450 DFC Pro, 4.0, working great! Funny because I have a NIB iKON sitting on the table that was meant for this heli but I am having a tough time taking the 3GX off and messing with a new gyro. "If it ain't broke......"