Register Now

pqr · 03-25-2012, 09:31 AM

Hi,

Just bought a second hand Airwolf that has this gyro inside. Can anyone identify it please so I can look for a manual.

The writing on the back says "Axis of Rotation". As installed this writing was vertical.

Thanks and Regards, Phil

modtron · 03-25-2012, 01:08 PM

Looks like an early CSM gyro - try contacting Colin Mill at.....

http://www.rcmodels.org/csm

modtron
Oxford UK

pqr · 03-26-2012, 02:32 AM

Thanks modtron. Will contact CSM as you suggest

Regards Phil

Elgyn · 03-26-2012, 10:59 PM

definitly a CMS. I have a ICG400 version. Mine doesn't have the extra plug at the botom

pqr · 03-27-2012, 02:05 AM

Thanks for that. Contacting CMS today and will advise any further info received

Regards Phil

pqr · 03-27-2012, 07:12 AM

I contacted CSM who came back to me immediately with the model number, and a URL for a download of the manual.

www.rcmodels.org/csm/360man.doc

This is GYRO was produced between 1997 and 2000.

CSM noticed that the reversing pin was missing and have offered to send me one free of charge.

1st class service from CSM, very much appreciated.

Also many thanks to modtron and Elgyn in identifying the manufacturer and supplying the contact details.

Thank you all

Regards, Phil

03-25-2012, 09:31 AM	#1 (permalink)
pqr Registered Users Join Date: Feb 2007	Anyone identify this Gyro please? Hi, Just bought a second hand Airwolf that has this gyro inside. Can anyone identify it please so I can look for a manual. The writing on the back says "Axis of Rotation". As installed this writing was vertical. Thanks and Regards, Phil Attached Thumbnails __________________ All the Gear - No idea! Trex 700N, 600N, 600E, 500E, 450 Pro, 450GF, 250 HK 250, 450, 500 for Spares Blade MSR

03-26-2012, 02:32 AM	#3 (permalink)
pqr Registered Users Thread Starter Join Date: Feb 2007	Thank you Thanks modtron. Will contact CSM as you suggest Regards Phil __________________ All the Gear - No idea! Trex 700N, 600N, 600E, 500E, 450 Pro, 450GF, 250 HK 250, 450, 500 for Spares Blade MSR

03-27-2012, 02:05 AM	#5 (permalink)
pqr Registered Users Thread Starter Join Date: Feb 2007	Looks like it Thanks for that. Contacting CMS today and will advise any further info received Regards Phil __________________ All the Gear - No idea! Trex 700N, 600N, 600E, 500E, 450 Pro, 450GF, 250 HK 250, 450, 500 for Spares Blade MSR

03-27-2012, 07:12 AM	#6 (permalink)
pqr Registered Users Thread Starter Join Date: Feb 2007	CSM ICG 360 I contacted CSM who came back to me immediately with the model number, and a URL for a download of the manual. www.rcmodels.org/csm/360man.doc This is GYRO was produced between 1997 and 2000. CSM noticed that the reversing pin was missing and have offered to send me one free of charge. 1st class service from CSM, very much appreciated. Also many thanks to modtron and Elgyn in identifying the manufacturer and supplying the contact details. Thank you all Regards, Phil __________________ All the Gear - No idea! Trex 700N, 600N, 600E, 500E, 450 Pro, 450GF, 250 HK 250, 450, 500 for Spares Blade MSR

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2012, 01:08 PM	#2 (permalink)
modtron Registered Users Join Date: May 2005	Looks like an early CSM gyro - try contacting Colin Mill at..... http://www.rcmodels.org/csm modtron Oxford UK

03-26-2012, 10:59 PM	#4 (permalink)
Elgyn Registered Users Join Date: Jul 2011	definitly a CMS. I have a ICG400 version. Mine doesn't have the extra plug at the botom

Register Now

Log-in