START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Electric Helicopters - Only E-Helis *No Commercial Ads - E-helis Only |
|
LinkBack | Thread Tools | Display Modes |
05-02-2010, 02:26 AM | #1 (permalink) |
Registered Users
Join Date: May 2008
|
SOLD - Outrage G5 for sale
Hi All,
I have a 'bind and fly' G5 for sale. It has the following: Stock CF Kit KRG5002 ( Never crashed ) Double Bearing Lower Mixing Arm Upgrade Stock Glass Fiber 350mm main blades (RotorTech 350mm currently installed, and in pretty good shape) CY Radix 350mm brand new (CosFlaw), tested them for a few flights. Stock tail blades, but (KBDD 59mm currently installed) Hitec HS5065MG Digital Servos on Cyclic Futaba S9257 on Tail Spartan DS760 Gyro Scorpion HKII 2221 1630KV Brushless Outrunner Motor Castle Creations - ICE 50 ESC Spektrum AR6200 RX 3 x Outrage NRG 1300 mAh packs (break in, plus about 20 cycles on each) Tail boom pack (RG50401-2) RG50144-SS Damper set I have the stock tail assembly, but it seems to be a bit sticky, so I currently have an Align 450 Sport tail (and vert. and horiz. fins) installed. The canopy is in decent shape, although the rubber grommets are a bit loose/sloppy and the holes have expanded a bit. Asking $450 shipped via USPS Parcel Post. Thanks Last edited by 3dz; 05-14-2010 at 11:00 PM.. |
Sponsored Links | |||
Advertisement |
|
05-08-2010, 01:54 AM | #6 (permalink) |
Registered Users
|
Bump up for ya. Wish I had the $ because I want one of these to fly in the back yard. Good luck with the sale. If you're interested in a nitro car for trade then let me know.
|
05-10-2010, 01:05 AM | #7 (permalink) |
Registered Users
Thread Starter
Join Date: May 2008
|
...
Thanks for the bump nwmtech, I wish you had the $$ too
Just looking for the $$ right now, but thanks for the offer... |
05-10-2010, 01:00 PM | #8 (permalink) |
Registered Users
Join Date: Jan 2010
|
thats a kick azz heli for sure
__________________
|
05-10-2010, 09:59 PM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: May 2008
|
Thanks N1kk..
|
Thread Tools | |
Display Modes | |
|
|