Register Now

atknight12 · 11-12-2015, 08:36 PM

I recently received a B400 3D from a friend of mine. He crashed it and the tail boom was bent. I replaced the tail boom from another model 400 that he had. The belt tension was loose on the tail gear. Is it advisable to tighten the belt by extending the boom out the from the body a bit. I did so and it looks alright. It didn't take much. Just wondering if this is a common method.

By the way I'm new at this!

Bee_random · 11-13-2015, 05:37 AM

Not only common, but the only way. Good on ya, hope you enjoy this little old heli - it's got so many of us flying, and addicted to flying.

atknight12 · 11-28-2015, 05:28 PM

Thanks!
I definitely appreciate it!!

11-12-2015, 08:36 PM	#1 (permalink)
atknight12 Registered Users Join Date: Jun 2015	B400 Belt Tension I recently received a B400 3D from a friend of mine. He crashed it and the tail boom was bent. I replaced the tail boom from another model 400 that he had. The belt tension was loose on the tail gear. Is it advisable to tighten the belt by extending the boom out the from the body a bit. I did so and it looks alright. It didn't take much. Just wondering if this is a common method. By the way I'm new at this!

11-13-2015, 05:37 AM	#2 (permalink)
Bee_random Registered Users Join Date: Mar 2009	Not only common, but the only way. Good on ya, hope you enjoy this little old heli - it's got so many of us flying, and addicted to flying. __________________ Still Crashing, Still Learning 6HV-U, Logo550 & Protos all vbar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2015, 05:28 PM	#3 (permalink)
atknight12 Registered Users Thread Starter Join Date: Jun 2015	Thanks! I definitely appreciate it!!

Register Now

Log-in