START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
2.4G Spektrum Radios Spektrum 2.4 Gigahertz Radios and Technology |
|
LinkBack | Thread Tools | Display Modes |
03-03-2011, 09:57 PM | #1 (permalink) |
Registered Users
Join Date: Oct 2007
|
Which RX's work with telemetry?
I'm going to need a 6 or 7 channel RX, and would like to be able to use telemetry. Which of their models are compatible with telemetry? How do you know?
|
Sponsored Links | |||
Advertisement |
|
03-04-2011, 02:08 AM | #2 (permalink) |
Registered Users
Join Date: Jun 2008
|
Without remaking a list all DSM2/DSMX Rxs are compatible.In order to get the antenna fade,frame loss and hold data it must have a data port.
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
03-04-2011, 06:45 AM | #3 (permalink) |
Registered Users
Join Date: Nov 2010
|
Spektrum
• AR6255 • AR7000 • AR7100 • AR7100R • AR7600 • AR8000 • AR9000 • AR9100 • AR9200 • AR9300 • AR12000 • AR12100 |
04-10-2011, 05:58 AM | #4 (permalink) |
Registered Users
Join Date: Dec 2010
|
The AR7100 will work. I just installed a new AR7100R in my Trex 700 and it WILL NOT work with the telemetry module.
__________________
T-Rex 700 Nitro ,BLITZ AVRO 90, M.A. Fury 55FBL, SAB Goblin 700, T-Rex 500, T-Rex 250,T-Rex 600E DFC, Outrage Velocity 50V2 |
04-10-2011, 07:59 AM | #5 (permalink) |
Registered Users
Join Date: Nov 2010
|
It has a data/bind port...it should........did you bind them together ? The TM100 has to be connected to the data port and you press the bind port on the TM100 and apply power to the AR7100 and binf to the Tx.
|
04-14-2011, 12:09 AM | #6 (permalink) |
Registered Users
Join Date: Dec 2010
|
Yep, I've used it on 2 different AR8000's. It will NOT bind. Yet it binds to both of the former-so I know the unit isn't bad.
__________________
T-Rex 700 Nitro ,BLITZ AVRO 90, M.A. Fury 55FBL, SAB Goblin 700, T-Rex 500, T-Rex 250,T-Rex 600E DFC, Outrage Velocity 50V2 |
04-14-2011, 12:38 AM | #7 (permalink) |
Registered Users
Join Date: Jun 2008
|
Instead of using the button on the TM module try using a y-harness in the batt/bind port with the TM module and a bind plug.
__________________
Too many helis & Too many planks Lots of DX radios & A couple Futaba 72mhz radios AMA member & Full scale plank driver HELIFREAK !!! |
04-14-2011, 06:47 AM | #8 (permalink) |
Registered Users
|
The AR6115 gives the RX performance numbers also if you are looking for a park flyer class RX. I have one in my 250 with the TM1100, works great.
__________________
Team Grand RC |
04-14-2011, 06:52 AM | #9 (permalink) |
Registered Users
|
also, the TM1000 not binding with the AR7100 has been reported before. I don't have an AR7100 to test but when I was hooking up the TM1100 to an AR6100 it wouldn't put the RX into bind mode also. my fix was to plug the TM1100 into a different slot on the RX then put a bind plug into the AR6100. Now turn it all on while holding the bind button on the TM. Both the TM and the RX should be fast flashing indicating they are in bind mode.
__________________
Team Grand RC |
Thread Tools | |
Display Modes | |
|
|