Register Now

Theo_P · 09-18-2010, 10:50 PM

I'm stumped. Whenever I flick the switch to put FM gyro into HH mode, it moves the servo to one extreme. Flicking the switch back to normal mode centers the servo again. Any ideas?

pril250 · 09-19-2010, 07:37 AM

I don't use the FM tail gyro myself but I hear people tend to apply some trim when that occurs (quite common with cheap gyros)

Theo_P · 09-19-2010, 05:14 PM

I've seen it happen when there isn't enough vibration isolation, but this thing is sitting on the bench!

TeeJayShelton · 09-19-2010, 06:09 PM

It moving to one side sitting still in hh mode is not abnormal, put it in rate mode get it adjusted well and when you put it back in HH mode it will still do the same

Theo_P · 09-20-2010, 09:42 PM

Do you mean even after I adjust it in normal mode, it will still move to one extreme in HH mode?

09-18-2010, 10:50 PM	#1 (permalink)
Theo_P Registered Users My HF Map location Join Date: Jan 2010	FM Gyro in HH Mode I'm stumped. Whenever I flick the switch to put FM gyro into HH mode, it moves the servo to one extreme. Flicking the switch back to normal mode centers the servo again. Any ideas?

09-19-2010, 07:37 AM	#2 (permalink)
pril250 Registered Users Join Date: Aug 2008	I don't use the FM tail gyro myself but I hear people tend to apply some trim when that occurs (quite common with cheap gyros) __________________ T-Rex600-ICE100,WR10ABEC,Scorp4025-1100+17T,Kasama head,QUK Swash CNC Tail,G-Force blocks,3152,DS760+BLS251,DX7+AR7000,FM. Blade400-CC ICE50,Scorp2221-8+12T,Sonix Head&Tail,5A BEC,HS65HB,Quark+3500G,AR7000,Align Carbon blades,TRex500 Skids,Flymentor.

09-19-2010, 06:09 PM	#4 (permalink)
TeeJayShelton Registered Users Join Date: Feb 2010	It moving to one side sitting still in hh mode is not abnormal, put it in rate mode get it adjusted well and when you put it back in HH mode it will still do the same __________________ The more I learn the more I realize I don't know T-Rex 800DFC Pro, 700LTOP, 700L Night, 550V2, 470LT, 250DFC, Oxy-2 x2, 3 x2, 4, Goblin 500 Sport(soon), Fireball x2, Blade 230s Night, 180CFX, MCPS, Nano CPX & NQX2 FPV, Vortex 250, Inductrix FPV. K110 Cars/Trucks/Planes AMA#L965241, Part 107 Pilot #iamundeservedlyblessedandiknowit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-19-2010, 05:14 PM	#3 (permalink)
Theo_P Registered Users Thread Starter My HF Map location Join Date: Jan 2010	I've seen it happen when there isn't enough vibration isolation, but this thing is sitting on the bench!

09-20-2010, 09:42 PM	#5 (permalink)
Theo_P Registered Users Thread Starter My HF Map location Join Date: Jan 2010	Do you mean even after I adjust it in normal mode, it will still move to one extreme in HH mode?

Register Now

Log-in