E6 your opinion please

[MeekaMoMo]

Hi,anyone flying the E6 and what is your opinion of it please,any thing bad about it.

yours,Marty.

[Plumbr]

I got one...
Plenty of power.
Tags is quite crisb...
Build goes together well.
Very smooth. I'm running full size v bar now though.

Good little heli, great power.
Would recommend.....
Won't work well with mini v though I found this was due to the motors high frequency when running.

[MeekaMoMo]

Hi many thanks for that Plumbr,if I get one it will be the bare kit,im using the TAGS on my Atom and like it,ive always been a JR man,though to be honest my Atom is flying well.

Yours,Marty.

[Stolla]

Friend got one, combo kit motor is crap esc is crap, jr fless system should be ok if you"re on jr equipment but no single line for vbar.
Incredible little heli though, i'd go bare bones, koby and minipyro with beast x!
There has been isues with the included servos in the combo kit as well
No problem with mini v on his,

[dylanwee]

Originally Posted by Stolla

Friend got one, combo kit motor is crap esc is crap, jr fless system should be ok if you"re on jr equipment but no single line for vbar.
Incredible little heli though, i'd go bare bones, koby and minipyro with beast x!
There has been isues with the included servos in the combo kit as well
No problem with mini v on his,

yeah the motor is quite down on the power side..
may i know why do you feel the ESC is crap?..
i'm trying out the ESC with the vbar governor..
set it to "airplane" mode, "fastest" throttle sensitivity..

everything works so far except a slight overshoot when i'm hard on the collective..
haven't really tune much.

though my scorpion commander v 130a with vbar governor works really well out of the box.. with all stock settings..

[Stolla]

Only crap because of the internal gov, Seems like align esc, but should work with vbar gov, overshoot you can probably tune out with the gain value, i have the vbar gov work quite well on the e8, although the jive is stil better at low headsped governing for me
Also try helicopter mode if you cant get it to work well on airplane, fusionhawk works better on helimode, faster bailout better spoolup

[Plumbr]

UNDER POWERED!!!!!! WTF

Heres a Vid I shot of Hamish Flying with complete stock setup including the TAGS...... Flown with 45C 2800MAH Thunderpower

Under powred???? I dont think so.............
This was only a test flight too. Around the 8th flight......

[ame]http://www.youtube.com/watch?v=Nr7iuEimCMM[/ame]

[dylanwee]

Originally Posted by Plumbr

UNDER POWERED!!!!!! WTF

Heres a Vid I shot of Hamish Flying with complete stock setup including the TAGS...... Flown with 45C 2800MAH Thunderpower

Under powred???? I dont think so.............
This was only a test flight too. Around the 8th flight......

http://www.youtube.com/watch?v=Nr7iuEimCMM

Yeah my comments on the stock motor was as compared to Kontronik MiniPyro and Scorpion Hk3026-1400 i was using on my Logo 400 previously.
Those 2 motors got more grunt as compared to the stock E6 motor. Especially so when you are hard on the collective, both motors seem to have that more torque..