12mm swash and follower

[keithgr148]

Hi I was wondering where I can get a 12mm swash and 12mm folliower for a 5 blade head I have seen 10 mm at Century . I am builting a MD 500 D with a raptor 90 SE airframe . I have the 5 blade head ,

thanks

Keithgr148

[JoseReyes]

Originally Posted by keithgr148

Hi I was wondering where I can get a 12mm swash and 12mm folliower for a 5 blade head I have seen 10 mm at Century . I am builting a MD 500 D with a raptor 90 SE airframe . I have the 5 blade head ,

thanks

Keithgr148

Under vario helis
http://www.eastcoastvario.com/

[keithgr148]

Thanks for the hellp but I see that they only carry 10mm no 12mm .

[JoseReyes]

Originally Posted by keithgr148

Thanks for the hellp but I see that they only carry 10mm no 12mm .

They have 12mm Isaac looking at them
http://www.vario-helicopter.biz/us1/...ducts_id=33096

http://www.vario-helicopter.biz/us1/...ducts_id=34727

[keithgr148]

Hey thanks you JoseReyes for the link to the parts they I need big help , I didn't see the full parts list on the first link , Do you if they with work on a raptor 90 Se ??

[JoseReyes]

Originally Posted by keithgr148

Hey thanks you JoseReyes for the link to the parts they I need big help , I didn't see the full parts list on the first link , Do you if they with work on a raptor 90 Se ??

Based on the description of the swash plate it should work with either 120 or 140 degrees on a 12mm shaft...

Are you using digital phasing? or mechanical phasing? with your setup... it should work either way...

Here is a better link. The one earlier I was trying to post with my phone... try this one and it has other there also..
http://www.vario-helicopter.biz/us1/...279_357&page=1