Tail servo compensates the wrong way.

[stupidme]

Hi guys. New here.

I had a crash with my V200D01 and after a complete rebuild and check of everything, my tail servo compensates the wrong way. For example, if I spin it up on the floor it naturally starts heading one way with its tail, the trail servo then moves the wrong way causing it to spin even faster. As you might understand it's not possible to fly at all. The servo is working fine when I hold the heli in my hand turning the rudder right pushes it the correct way, and left, the correct way. So whats the problem? I even tried turning my RX around 180 degrees just to check, but the problem is the same. WTF

The worst thing is I just ordered a bunch of parts for it and now I have a gazillion parts and can't fly it. Help please?

[dcb103]

Have you put the tail servo on the correct side of the heli, from behind on the right side? If yes put it on the other side (this works same as reversing the gyro).

[MiniCPflyer0110]

Check that^ (what he said) and if the servo is on the right side, check to see if your tail blades are on the right way. Make sure they're not backwards.