Fun, Learning, Friendship and Mutual Respect START  HERE
Register FAQ PM Events Groups Blogs Calendar Mark Forums Read


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Mikado Logo Helicopters
Reload this Page Post your Logo 600 setups


Mikado Logo Helicopters Mikado Logo Helicopters Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 11-15-2015, 07:23 PM   #1 (permalink)
Registered Users
 
Posts: 2,438
 

Join Date: Sep 2011
Default Post your Logo 600 setups
I am sure there are a few of us wondering what everyone else uses.
This can provide useful information for others.

List your setups. Use this as a template :

Motor :
Pinion :
Esc :
Gov :
Batts :
Head speed :
Blades :
Runtime :
Flying style :
Pitch :
__________________
logo 600sx, 480, vcontrol ..mcpsbl
Last edited by Dsss; 11-17-2015 at 07:18 AM..
Dsss is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-15-2015, 07:25 PM   #2 (permalink)
Registered Users
 
Posts: 2,438
Thread Starter Thread Starter
 

Join Date: Sep 2011
Default
Motor :kontronik 700-52
Pinion :12
Esc heli jive :120 v11
Gov :vbar
Batts :10s 4400
Head speed :2000
Blades : Youngblood radix 625
Runtime : 7:30
Flying style : sport /mild 3D
Pitch : 12.5
__________________
logo 600sx, 480, vcontrol ..mcpsbl
Last edited by Dsss; 11-24-2015 at 06:10 AM..
Dsss is offline        Reply With Quote Quick reply to this message
Old 11-15-2015, 08:15 PM   #3 (permalink)
Registered Users
 
Posts: 654
 

Join Date: Oct 2009
Location: Vancouver, Wa
Default
XNova 4025 1120
Kon 120
600 blades



Not finish
Jim Hansen is offline        Reply With Quote Quick reply to this message
Old 11-15-2015, 08:45 PM   #4 (permalink)
Registered Users
 
Posts: 680
 

Join Date: Jun 2013
Default
Motor :kontronik 700-45
Pinion :13
Esc :Castle ICE 2 80HV
Gov :Castle
Batts :12s 3300mah and 12s 4400mah
Head speed :2100rpm
Blades : Edge 620
Runtime : 4:30min (3300mah) and 5:30min (4400mah)
jorgeurizar is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 01:21 AM   #5 (permalink)
Registered Users
 
Posts: 5,571
 

Join Date: Nov 2012
Default
Motor: Pyro 30-12
Pinion: 13t
Esc: Jive 80
Gov: Jive 80
Batts: 10s 4000 30c
Head speed: 2300
Blades: EDGE SE 603
Runtime: 3 mins, then batteries dead.
__________________
Jonas
OMPHOBBY M7, M4, M2 EVO & M1 EVO
Designing things for Fun-Key RotorTech & OMPHOBBY
Johnny31297 is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 02:57 AM   #6 (permalink)
Registered Users
 

Join Date: Jan 2007
Default
Logo 600SX
Motor : Pyro 700-56 Comp
Pinion : 11T
Esc : Jive Pro 120HV
Gov : Jive Pro
Batts : 12s 4000mAh 60C
Head speed : 2100rpm
Blades : Rotortech 640mm mains, 105mm tails
Runtime : 4.5 mins technical 3D
Collective: +-15.5°

Logo 690SX V2
Motor : Pyro 750-50 Comp
Pinion : 12T
Esc : Jive Pro 120HV
Gov : Jive Pro
Batts : 12s 4400mAh 45C
Head speed : 2050rpm
Blades : Rotortech 670mm mains, 105mm tails
Runtime : 4 mins technical 3D
Collective: +-15.5°
__________________
Oxy2 210 | Oxy3 285 | Oxy4 380 | Logo 480XX | 600SX | 650SX | 690SX | 700 | 700XX | VControl
Last edited by mahbouni; 11-16-2015 at 12:59 PM..
mahbouni is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 04:17 AM   #7 (permalink)
Registered Users
 

Join Date: Dec 2007
Default
600SE no. 1 Plastic Frame with Uvular

Motor : 4035-500KV rewind to 515KV
Pinion : 11
Esc : Jive Pro 120
Gov : Jive Pro
Batts : 4400mAh, 4.35V/cell
Head speed : 1980
Blades : YB 690mm
Runtime : 6~7 mins

600SE no. 2 Carbon frame with Uvular

Motor : Pyro 700 rewind to 535 KV
Pinion : 11
Esc : Jive Pro 120
Gov : Jive Pro
Batts : 5500mAh 4.27V/cell
Head speed : 1990
Blades : YB 690mm
Runtime : 7~8 mins
Chris.C is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 08:24 AM   #8 (permalink)
Registered Users
 
Posts: 694
 

Join Date: Feb 2014
Default Post your Logo 600 setups
Logo 600sx v2

Motor : Pyro 700-45

Pinion : 12t

Esc : Jive 80HV

Gov : Jive

Servos: Futaba 272sv / 276sv

FBL: BD3sx

Batts : Gens Ace 3300 45c 12s stick-packs

Head speed : 1800/1900/2000

Blades : Halo 610 & Rotortech 95
Collective/cyclic: 12 / 10 degrees

Runtime : 4.5 to 5 minutes



Speedix Tail box, Speedix belt tensioner pulleys, Speedix Tail belt drive pulley, Optipower Ultraguard
__________________
Diversion 760, Specter 700, Oxy5, TDF, Kraken, Logo600, Dune 600, Vcontrol Touch
3DME Alloy Vtouch Design Team - https://3dminiatureengineering.com/p...m-case-upgrade
Last edited by ChopsyWA; 11-16-2015 at 04:43 PM..
ChopsyWA is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 08:25 AM   #9 (permalink)
Registered Users
 
Posts: 5,112
 
My HF Map location
Join Date: Jun 2006
Location: Chrisitansburg VA USA
Default
Motor :Scorpion hk3-4020-1100 Mikado Edition
Pinion :12T (mod 0.7)
Esc :Jeti Mezon 160lv-rpm
Gov :Jeti Mezon
Batts :6s5000
Head speed :1600
Blades :Edge 623 (600s would be better)
Runtime :7-12min


Motor :Xera 4030-3y 470kv
Pinion :12T (mod 1.0)
Esc :Jeti Mezon 130hv-rpm
Gov :Jeti Mezon
Batts :12s3300
Head speed :1900
Blades :Edge 623
Runtime :5min
__________________
Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case
prototype3a is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 08:53 AM   #10 (permalink)
Registered Users
 
My HF Map location
Join Date: Nov 2009
Default
6003D
Current

Motor : Pyro 700-52
Pinion : 11T
Esc : Jive 80Hv Pro
Gov : Above
Batts : 12S/3300 sticks
Head speed : 1950/2100
Blades : Radix 600mm
Runtime : 4:00 - 7:00 using Jive Capacity warning.

Planned

Motor : Pyro 650-535 10+9YY
Pinion : 11T
Esc : Jive 80Hv Pro
Gov : Above
Batts : 12S/3700
Head speed : 1950/2100
Blades : Switch 603
Runtime : ???
__________________
GimpyGolden is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 09:15 AM   #11 (permalink)
Registered Users
 
Posts: 5,571
 

Join Date: Nov 2012
Default
Request: post flying style and collective as well please. These flight times are ridiculously high. I'll adjust my previous statement accordingly:

Quote:
Originally Posted by Johnny31297 View Post
Motor: Pyro 30-12
Pinion: 13t
Esc: Jive 80
Gov: Jive 80
Batts: 10s 4000 30c
Head speed: 2300
Blades: EDGE SE 603
Collective: +-14°
Flying style: Technical/Hard 3D, depends on the mood
Runtime: 3 mins, then batteries dead.
__________________
Jonas
OMPHOBBY M7, M4, M2 EVO & M1 EVO
Designing things for Fun-Key RotorTech & OMPHOBBY
Johnny31297 is offline        Reply With Quote Quick reply to this message
Old 11-16-2015, 09:35 AM   #12 (permalink)
Registered Users
 
My HF Map location
Join Date: Nov 2009
Default
690Sx

Current:

Motor : Scorpion Ultimate 4525-370 Single Wire Hand Wind
Pinion : 14T
Esc : Jive 80Hv, 8 flash every flight
Gov : Above
Batts : 12S/5000 Stick
Head speed : 1500/1600
Blades : Zeal Energy 690mm
Runtime : 6:00

Planned:

Motor : Pyro 700-390 8+9YY
Pinion : 13/14T
Esc : Jive 80Hv
Gov : Above
Batts : 12S3700
Head speed : 1500
Blades : Switch 693
Runtime : ???
__________________
GimpyGolden is offline        Reply With Quote Quick reply to this message
Old 11-17-2015, 06:37 PM   #13 (permalink)
Registered Users
 
Posts: 87
 

Join Date: Apr 2004
Default
Used 600 3D that I picked up from a good friend. Been flying it for 5 years. A sweet flyer even with all the older style gear on it.

Motor :Orbit 30-12 Heli Expert
Pinion : 10 T
Esc :Jazz 55-10-32
Gov :As above
Batts :10s 4000mah
Head speed : 1700/1800
Blades :RotorTech 620
Runtime : Solid 6 Min with time to spare
Flying style : Sport/mild 3D
Pitch : +/- 12.5

Al
Al T is offline        Reply With Quote Quick reply to this message
Old 11-18-2015, 07:20 AM   #14 (permalink)
Registered Users
 
Posts: 114
 

Join Date: Dec 2012
Default
Logo 600sx v1

Motor: Kontronik Pyro 700-52 (rewind to 500kv)
Pinion: 12t
Esc: YGE 90HV
Gov: vbar
Batts: 12s 3300mah
Head speed: 2200
Blades: Edge 603
Runtime: 4min 30sec
Flying style: 3D / mild 3D
collective: +/- 12.5
cyclic at full collective: +/- 7.5 (abt +/-11 @ zero collective)

no OWB issues after 250 flights.
__________________
2x Logo 600sx, Logo 480xx, JR, Torq, MKS, YGE, Vbar, Skookum...
szaki75 is offline        Reply With Quote Quick reply to this message
Old 11-24-2015, 05:59 PM   #15 (permalink)
Registered Users
 
Posts: 11,631
 

Join Date: Oct 2008
Location: Midland, Michigan
Default
Still under construction - just electronics setup to complete:

Logo 600SX V1
Motor : Kontronik Pyro 700-45
Pinion : 12t
Esc : Jive 80HV
Gov : Jive Mode 4
Batts : Thunder Power 55C 12S3300; Revolectrix 60C 12S3000
Head speed : 1800-1900-2000
Blades : Edge SE603; SE95
Runtime : 5 mins
Flying style : Sport 3D
Pitch : 12.5
__________________
= Rb43 =
Rob43 is online now        Reply With Quote Quick reply to this message
Old 11-24-2015, 06:16 PM   #16 (permalink)
Registered Users
 

Join Date: Jan 2012
Default
Motor : 700-45
Pinion : 11
Esc : jive 80hv
Gov : mode 4
Batts : pulse and thor 3700 45c
Head speed :1800-2100
Blades : rail 626 and rail 105
Runtime : 4:00- 5:00
Flying style : smooth 3d
Pitch : +- 12.5 deg.
__________________
Diabolo 700 2018 /. Henseleit TDF, TDR 800
TT E700, Align Trex 700L v2, Oxy 5 Meg, Nitroxy, 4 max, Oxy 3.
Kontronik, Spirit, Futaba
Lynx Heli field rep. lynxheli.com
wstuart is offline        Reply With Quote Quick reply to this message
Old 11-25-2015, 08:04 AM   #17 (permalink)
Registered Users
 
Posts: 3,557
 

Join Date: Sep 2006
Default
Quote:
Originally Posted by Dsss View Post
I am sure there are a few of us wondering what everyone else uses.
This can provide useful information for others.

List your setups. Use this as a template :

Motor : Scorpion 4035-450
Pinion : 12t
Esc : YGE 90 HV
Gov : VBAR
Batts : Thor 12s 3700s
Head speed : 2200
Blades : RT
Runtime : 5:00
Flying style : Sport/3D (hack)
Pitch : +/- 14 degrees
Mine
__________________
MikadoUSA Tech Support
Laughingstill is offline        Reply With Quote Quick reply to this message
Old 12-03-2015, 12:28 AM   #18 (permalink)
Registered Users
 

Join Date: Jul 2012
Default Logo 600
Logo 600SX V1
Motor : Scorpion 4035 450kv
Pinion : 12t
Esc : Jive 80HV
Gov : Jive Mode 4
Batts : Revolectrix 40C 12 S3300
Head speed : 2100-2200
Blades : Edge SE603; SE95
Runtime : 5 mins
Flying style : Sport 3D
Pitch : 12.5

&

Logo 600
Motor : Scorpion 4225 500kv
Pinion : 11t
Esc : Jive 60HV
Gov : Jive Mode 4
Batts : Revolectrix 40C 12S3300
Head speed : 2100-2200
Blades : Edge SE603; SE95
Runtime : 5 mins
Flying style : Sport 3D
Pitch : 12.5
staz1234 is offline        Reply With Quote Quick reply to this message
Reply



« Previous Thread | Next Thread »

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
 Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright - Advertising - Contact Us - HeliFreak.com - Privacy Statement - Top

SEO by vBSEO 3.6.1