Register Now

smoothb10 · 07-30-2008, 11:56 PM

walkera 4#3B ridgid head tip. if you found that your walkera's head was to loose causeing a pendulum effect while flying. place two small thin washers on each side of the feathering shaft behind the blades. this will take up the gap there and still give some dampening required for a nice seady transition from hover to forward flight. works like a charm and boy what a difference it made on mine. oh yea sorry for the pic its the best my cam can give on this small heli...LOL

va3sax · 08-25-2008, 10:22 AM

do you know what type of washers these were? 1/8-40? smaller?

Dusty1000 · 09-24-2008, 06:32 PM

If you have any old main motors, take it apart and you'll find perfect size washers on the motor shaft, one on either end.

07-30-2008, 11:56 PM	#1 (permalink)
smoothb10 Registered Users Join Date: Oct 2006	walkera 4#3B ridgid head tip walkera 4#3B ridgid head tip. if you found that your walkera's head was to loose causeing a pendulum effect while flying. place two small thin washers on each side of the feathering shaft behind the blades. this will take up the gap there and still give some dampening required for a nice seady transition from hover to forward flight. works like a charm and boy what a difference it made on mine. oh yea sorry for the pic its the best my cam can give on this small heli...LOL Attached Thumbnails __________________ US Army 1995-2007 Iraq 1st tour 2003-2004 2nd tour 2005-2006 Kiowa Warrior Crewchief 15s20 Reinlisted Army 30 Dec 2008 Signal Company Team Chief

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-25-2008, 10:22 AM	#2 (permalink)
va3sax My HF Map location Join Date: Sep 2007	do you know what type of washers these were? 1/8-40? smaller?

09-24-2008, 06:32 PM	#3 (permalink)
Dusty1000 Registered Users Join Date: Sep 2008	If you have any old main motors, take it apart and you'll find perfect size washers on the motor shaft, one on either end.

Register Now

Log-in