Trex 550 V2 head block

[zomaar]

Hello,

In an inverted move the ground jumped up (again) cracked the head block

ordered the wrong part
the boxed one is 550EFL Newly Designed Main Rotor Housing Set Black (H55007A)

what is mine then, I run a Trex 550e V2, and its not for lolz , but a 'first' V2
so not yet slant , but the 'new frame 1,6 mm , other tail ratio , etc...)


?

[Toocool4]

I have the 550e V2 and like you i made the same mistake when i needed a new head.

The one you need is http://shop.align.com.tw/product_inf...oducts_id=3908

By the way it's an 600EFL Pro head

[FNFAL]

For aftermarket, at the price..this knock-off might work too...

http://www.hobbyking.com/hobbyking/s..._Trex_550.html

or the genuine:

http://www.heliflightcenter.com/KDE_...-600-mrhfb.htm

[xrayray]

I almost ordered the wrong part too. There's like 2 or 3 different heads between the 550 and 600.

I happen to come across a new FL head that is optional on the new Dominators. I picked up a pair of 3mm x 48mm turnbuckles (for cars) for only 10 bucks! And still using my old old old V1 grips and they are on the new style feathering shaft with 8mm thurst bearings.

Works great! This setup drops your head around 15mm by the way.