Hobbyking HKIII 4035-530kV rewind for fun

[krtek2k]

Hello,
I am back with my first motor i rewound.
http://hobbyking.com/hobbyking/store...ter_Motor.html
I done it 1,4mm 11(6+5)D and it was 547kV.
After i gained some rewinding skillz, i done it again with wire 1,5mm 12(6+6)YY.
It is 545kV. It is impossible to get more copper into it
I also done one test rewind with wire 0,5mm 13(6+7)YY = 509kV
I have to do 8mm shaft to used it in my Logo700XX.
It was in the air today, and i have to say, it is not bad motor for have some fun with rewindings job
I am going with 1650 and 1950rpm, it was 6minutes flight, i burned 3400mAh from 5000mAh 12S with kosmik 160.
My came pretty well balanced, no vibrations.

[Bladecpnitro]

Looks great man! Did you epoxy or varnish the wires or just let it goooooo, let it gooooo being highly sure of yourself and over confident in your new found winding skills?


Hey do you have any vids of the Logo 700?

[krtek2k]

thx, i am epoxying it, than wipe/sponge it little off, than 80degree celsius at oven for 15minutes.

I dont have any new 700XX video, i am now during winter flying with 550SX.
When it will be better weather, i will do some video.