Register Now

uncflyboy · 04-17-2009, 08:54 AM

besides DS410's what is another good cyclic servo for the 250?

helinelly · 04-17-2009, 09:08 AM

but now i use the jrds285 with metalgear upgrades man these are good and fast....regards helinelly

krayziek04 · 04-17-2009, 10:24 AM

they now have the new ds410 all metal gears now or the hs65mg which fit perfectly.

snjbird · 04-17-2009, 03:03 PM

In the future I'm sure I'll try a different servo setup, but for now I am having just great luck with the stock DS410. On spec it is hard to find anything better? Stand by and I'll look...

snjbird · 04-17-2009, 03:20 PM

HS65 .11 @6V 31oz
HS5065 .11 @6V30.5oz
DS 285 .14 @6V19oz
DS 287 .07 @6V16oz
S3157 .09 @6V24oz
S3156MG .11 @6V33oz
DS410 .09 @ 6V30.5
DS420 .06 @6V13.8

My 2 Cents · 04-17-2009, 08:40 PM

Wow thanks for that chart. I also was wondering if their were any faster cyclics, but looks like these 410s are the ticket. I have been threw 3 crashes with mine 1 was full speed head button into the side of the house yesterday. And they are still good. Knock on wood for that..

Got another one of those charts to show the TQ.??? that would be very nice of you SNJ.

Thanks
My 2 Cents

ferret30 · 04-18-2009, 12:09 AM

Quote:

Originally Posted by My 2 Cents

Wow thanks for that chart. I also was wondering if their were any faster cyclics, but looks like these 410s are the ticket. I have been threw 3 crashes with mine 1 was full speed head button into the side of the house yesterday. And they are still good. Knock on wood for that..

Got another one of those charts to show the TQ.??? that would be very nice of you SNJ.

Thanks
My 2 Cents

TQ? Torque? Isn't that the number after the voltage?

My 2 Cents · 04-18-2009, 01:37 AM

hehe maybe I should open my eyes alittle more so I can see they are there.

Thanks

snjbird · 04-18-2009, 05:09 AM

Just looked and the DS410M has the same specs as the DS410 I wonder if you could just change out the gears to the full metal? like you can on the HS65s

My 2 Cents · 04-18-2009, 05:18 PM

Yes you can, Align sells the kits to upgrade ours already. It is on their website. If I remeber correct in the picture it only came with 2 gears the output shaft and one other plastic, only because the rest of our gears are already metal...Gotta say tho after 4 crashes still going strong on the plastics. But once these go I will have to pick me up a set up of those metal gears. For the 8bucks or what ever its going to cost I think its worth it... Wont notice it in flight, but just for a piece of mind.

04-17-2009, 08:54 AM	#1 (permalink)
uncflyboy Join Date: Mar 2009	cyclic servos for 250 besides DS410's what is another good cyclic servo for the 250?

04-17-2009, 09:08 AM	#2 (permalink)
helinelly Registered Users Join Date: Jun 2008	i used futaba s3117 but now i use the jrds285 with metalgear upgrades man these are good and fast....regards helinelly

04-17-2009, 03:03 PM	#4 (permalink)
snjbird Registered Users My HF Map location Join Date: Feb 2008	In the future I'm sure I'll try a different servo setup, but for now I am having just great luck with the stock DS410. On spec it is hard to find anything better? Stand by and I'll look... __________________ No Plankers were injured in the making of this post! TOY BOX contents Mcp x, 450 Pro VBar, 500 VBar, 12S 600CF VBar... Mikado Logo 6003D VBar Proudly flying KBDD, MKS, Castle, Scorpion and some planks too

04-17-2009, 03:20 PM	#5 (permalink)
snjbird Registered Users My HF Map location Join Date: Feb 2008	Here ya go! HS65 .11 @6V 31oz HS5065 .11 @6V30.5oz DS 285 .14 @6V19oz DS 287 .07 @6V16oz S3157 .09 @6V24oz S3156MG .11 @6V33oz DS410 .09 @ 6V30.5 DS420 .06 @6V13.8 __________________ No Plankers were injured in the making of this post! TOY BOX contents Mcp x, 450 Pro VBar, 500 VBar, 12S 600CF VBar... Mikado Logo 6003D VBar Proudly flying KBDD, MKS, Castle, Scorpion and some planks too

04-18-2009, 05:09 AM	#9 (permalink)
snjbird Registered Users My HF Map location Join Date: Feb 2008	Just looked and the DS410M has the same specs as the DS410 I wonder if you could just change out the gears to the full metal? like you can on the HS65s __________________ No Plankers were injured in the making of this post! TOY BOX contents Mcp x, 450 Pro VBar, 500 VBar, 12S 600CF VBar... Mikado Logo 6003D VBar Proudly flying KBDD, MKS, Castle, Scorpion and some planks too

04-17-2009, 10:24 AM	#3 (permalink)
krayziek04 Registered Users My HF Map location Join Date: Dec 2008	they now have the new ds410 all metal gears now or the hs65mg which fit perfectly.

04-17-2009, 08:40 PM	#6 (permalink)
My 2 Cents Registered Users Join Date: Jul 2008	Wow thanks for that chart. I also was wondering if their were any faster cyclics, but looks like these 410s are the ticket. I have been threw 3 crashes with mine 1 was full speed head button into the side of the house yesterday. And they are still good. Knock on wood for that.. Got another one of those charts to show the TQ.??? that would be very nice of you SNJ. Thanks My 2 Cents

04-18-2009, 01:37 AM	#8 (permalink)
My 2 Cents Registered Users Join Date: Jul 2008	hehe maybe I should open my eyes alittle more so I can see they are there. Thanks

04-18-2009, 05:18 PM	#10 (permalink)
My 2 Cents Registered Users Join Date: Jul 2008	Yes you can, Align sells the kits to upgrade ours already. It is on their website. If I remeber correct in the picture it only came with 2 gears the output shaft and one other plastic, only because the rest of our gears are already metal...Gotta say tho after 4 crashes still going strong on the plastics. But once these go I will have to pick me up a set up of those metal gears. For the 8bucks or what ever its going to cost I think its worth it... Wont notice it in flight, but just for a piece of mind.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in