Spartan Quark wiring configuration

[JKEP44]

Hello, I have a spartan quark gyro that has had the external wiring damaged. I have looked around at pictures in the "For Sale" forums and have a general idea what wire hooks to what but I cant be completely sure. In the pictures that I find some of the wiring is covered by heat shrink so I cant tell exactly what wire goes to what plug. Is there anybody that could look closely at theirs or just happens to know. Below is a picture of mine.

[Ampdraw]

https://www.helifreak.com/showthread.php?t=235741

Info there.

Amp

[Steve Evans]

The gain (red) plug appears to be more or less intact. This carries power and ground to the gyro together with the gain signal.

The black rudder plug has fatter power and ground leads which get as far as the heatshrink and then just doubles back to the tail servo connector. The black plug also has the rudder signal connected to it (yellow) and the tail servo connector has the green cable connected to it.

This very simple, and clever, arrangement provided a hefty power connection to the servo from the rudder plug, keeping the cabling to the gyro itself as light as possible.

Steve

[Angelos]

http://www.spartan-rc.com/resources/...02&category=22

-Angelos

[JKEP44]

Thanks guys, I got it

[Bob O]

Depending upon where I end up mounting the Quark, I might have to use an extension. This thread has some excellent info in it.

[cpmboy]

any pics for quark wiring layout?....Im gonna slap one on my 450 pro

[Bob O]

Originally Posted by cpmboy

any pics for quark wiring layout?....Im gonna slap one on my 450 pro

Unless the 450Pro guys see this, you might have to browse the 450Pro pics thread.