Register Now

centuryman · 03-31-2008, 11:26 PM

I have had three bearings spin in the m ain gears now on my 450 mx. Obviosly this is a weak link.Any body know the fix?Will a trex maingear fit?

WillJames · 04-01-2008, 02:01 AM

If it is like the T-REX and has the one-way pressed into a metal sleve, yse green locktite on it to keep it from slipping. The old T-REX maingear/autohub did this as well and the green fixed it. Green locktite is like thin CA in that it wicks between the parts.

bgagnon · 04-01-2008, 11:30 AM

I have had the same problem but only in cold condition (obviously a metal expansion - Contraction problem).

So we put green on each parts (the one that touch the main gear and the autorotation gear)?

Thanks

03-31-2008, 11:26 PM	#1 (permalink)
centuryman Join Date: Jan 2008	One way bearing stripping out in main gear. I have had three bearings spin in the m ain gears now on my 450 mx. Obviosly this is a weak link.Any body know the fix?Will a trex maingear fit?

04-01-2008, 02:01 AM	#2 (permalink)
WillJames Registered User My HF Map location Join Date: Mar 2004	If it is like the T-REX and has the one-way pressed into a metal sleve, yse green locktite on it to keep it from slipping. The old T-REX maingear/autohub did this as well and the green fixed it. Green locktite is like thin CA in that it wicks between the parts. __________________ William James Crazy wife still trying to kill me.

04-01-2008, 11:30 AM	#3 (permalink)
bgagnon Registered Users My HF Map location Join Date: Jan 2008	I have had the same problem but only in cold condition (obviously a metal expansion - Contraction problem). So we put green on each parts (the one that touch the main gear and the autorotation gear)? Thanks __________________ Bruno Mini Titan E325, Stock, 2100T Gyro Combo No! No! it's not how it looks, My flying gets better.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in