Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > MSH Protos


MSH Protos MSH Protos Helicopter Support Forum


Reply
 
LinkBack Thread Tools Display Modes
Old 07-11-2012, 04:49 PM   #1 (permalink)
Registered Users
 
Posts: 789
 

Join Date: Mar 2012
Default Which TP 6s battery for stretched FBL P500 with Infinity Alum Tail?

I’m just about done gathering all my parts for my protos build. I’ll be stretching the boom, be using stock motor (Hyperion Version) with 14tooth pinion, edge 473 blades, Infinity Alum Tail. My flying will be sport and working up to mild 3D.

For balance and flight times would should I start with a 2700 or 3300 mha TP 45C 6s pack?

Here are the specs on the two packs:

2700mAh - 419gr - 44mm x 39mm x 127mm
3300mAh - 516gr - 43mm x 44mm x 136mm

Thanks for any insight on this. This is the last piece of the puzzle I need to figure out (and get on order).
NickBee is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-11-2012, 05:16 PM   #2 (permalink)
Registered Users
 
Posts: 3,488
 
My HF Map location
Join Date: Dec 2009
Default

The 3300 TP should be perfect.
__________________
MSH Protos 500, SAB 630
alexf1852 is offline        Reply With Quote Quick reply to this message
Old 07-16-2012, 08:23 AM   #3 (permalink)
Registered Users
 
Posts: 789
Thread Starter Thread Starter
 

Join Date: Mar 2012
Default

Thanks Alex. What kind of flight times should I expect with the 3300 and sport flying?


Sent from my iPad using Tapatalk HD
__________________
Diabolo…HC3SX…Gmauro HKIII-4530-450…KOSMIK 200…MKS HLB950/HLB980...Rev 14s 4400 60C
Protos 500 Stretched
…HC3SX…Hyperion 3026-880kv…KOBY 90…MKS DS9670A+/DS-760...TP 6s 3300 65C

mCP X bl...Nano QX...Futaba 8FG
NickBee is offline        Reply With Quote Quick reply to this message
Old 07-16-2012, 10:38 AM   #4 (permalink)
Registered Users
 
Posts: 3,488
 
My HF Map location
Join Date: Dec 2009
Default

Not sure as I don't have mine stretched.

Sent from my ADR6300 using Tapatalk 2
__________________
MSH Protos 500, SAB 630
alexf1852 is offline        Reply With Quote Quick reply to this message
Old 07-16-2012, 11:50 AM   #5 (permalink)
Registered Users
 

Join Date: Nov 2008
Default

I get 4:30 on my 2700mah tp 65c doing half assed 3d with a lot to spare. Maybe you could go for 6:00 to be safe
__________________
God made firefighters so cops could have heroes too.

Firefighters: Chicks dig us and cops want to be like us, because we find them hot and leave them wet.
Firefighternickn is offline        Reply With Quote Quick reply to this message
Old 07-16-2012, 04:59 PM   #6 (permalink)
Registered Users
 
Posts: 5,864
 
My HF Map location
Join Date: Sep 2010
Default

6 min on my 3300 mild 3D and speed passes, about 28-33% remaining on average
__________________
Dan Pesonen
FBL, Don't think about it, DO IT.
mCX2, nCPX, mCP X, Blade 400, MSH PRÔTOS, T-700N
"Tri-Flow"
I put that S*** on everything!"
banditpowdercoat is offline        Reply With Quote Quick reply to this message
Old 07-16-2012, 08:14 PM   #7 (permalink)
Registered Users
 
Posts: 789
Thread Starter Thread Starter
 

Join Date: Mar 2012
Default

Thanks for the feedback guys. Those are the kind of numbers I was aiming for!
NickBee is offline        Reply With Quote Quick reply to this message
Old 07-17-2012, 06:24 AM   #8 (permalink)
Registered Users
 

Join Date: Aug 2011
Default How about 2200mah high C packs?

I'm also getting the stretched protos with scorpion 880kv and maybe 13T or 14T pinion, by this weekend.

I currently run my stock P500 on 6S, 14T, 880kv scorpion, and can maintain 2700rpm governed for the entire flight. I like the flight times (5:30-6.00) I'm getting with about 20-25% left.

I have read that 3000rpm and above is overkill, and that 2700rpm is right smack in the middle of the sweet spot for the stock.

Question:
I'm thinking that a 13T at 2400rpm on the 6S stretched with SAB 470 blades would be the equivalent to the 2700rpm on 14T for the stock - is this correct? I'm not after high headspeeds, but I want to be in the 'sweet spot' as they say...


Also, in my flight tests, it's strange but flying back to back flights, the 2200mah and 2650mah packs give me the same flight times, both down to 20-25%. I find that the weight savings in the 2200 packs just makes me use a little less collective in all moves.

Question:
That said, can I run 2200 packs in the stretch, as in will it CG right? If someone has done back to back comparison flights (mild 3D, goofing around, a few speed runs per flight), what's the difference in flight times between the 2200 and 3300 with the setup above?

Appreciate the assistance!
__________________
SRIMOK 90E Faifa TJ VBAR HK-4525-UE
SRIMOK 90E Faifa Ellie VBAR P700-520

PRÔTOS 500 Brain HK-3026
PRÔTOS 500 StretchVbar HK-3026
rchelijc is offline        Reply With Quote Quick reply to this message
Old 07-18-2012, 02:36 PM   #9 (permalink)
Registered Users
 
Posts: 926
 

Join Date: Apr 2009
Location: Capital town Ljubljana, Slovenia
Default

Quote:
Originally Posted by NickBee View Post
Thanks for the feedback guys. Those are the kind of numbers I was aiming for!
How are you satisfied with Infinity hobby alu tail, I have just purchesed one and waiting to get it.
__________________
SAB GOBLIN 700, Vbar,YGE 120HV,Align 750mx,
Scale JET RANGER III 700 size with Flasher 600 mechanics ,
Scale Agusta Bell 212- 800 size - under development,

SAB RAW 420 with CGY 760R, Futaba Transmitter T16IZSuper !
Xsiluro is online now        Reply With Quote Quick reply to this message
Old 07-18-2012, 02:51 PM   #10 (permalink)
Registered Users
 
Posts: 789
Thread Starter Thread Starter
 

Join Date: Mar 2012
Default

Quote:
Originally Posted by Xsiluro View Post
How are you satisfied with Infinity hobby alu tail, I have just purchesed one and waiting to get it.
I have not installed it yet but it seems very nice and solid. The one thing I'm not sure on is if there is a way to key it to the boom (90 deg) or if you just have to eyeball it.
NickBee is offline        Reply With Quote Quick reply to this message
Old 07-18-2012, 03:06 PM   #11 (permalink)
Registered Users
 
Posts: 926
 

Join Date: Apr 2009
Location: Capital town Ljubljana, Slovenia
Default

I belive you will have to eyeball it. It is not that dificult
__________________
SAB GOBLIN 700, Vbar,YGE 120HV,Align 750mx,
Scale JET RANGER III 700 size with Flasher 600 mechanics ,
Scale Agusta Bell 212- 800 size - under development,

SAB RAW 420 with CGY 760R, Futaba Transmitter T16IZSuper !
Xsiluro is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1