START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
500 Class Electric Helicopters 500 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
05-21-2012, 11:17 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2009
|
CC Ice 75 & Scorpion 3026-1400
As the title of this topic states, I plan on running this combo in my 500. Will this setup work or should I upgrade to the CC Ice 100????
__________________
T-Rex 700E / T-Rex 600N / T-Rex 600ESP / T-Rex 550E T-Rex 500ESP / T-Rex 500 DFC / T-Rex 450 Pro / T-Rex 450SA T-Rex 250 / T-Rex 100 / Blade mCPx / Blade mCX MAAC: 80309 |
Sponsored Links | |||
Advertisement |
|
05-21-2012, 11:27 PM | #2 (permalink) |
Registered Users
Join Date: Dec 2011
|
__________________
☆☆☆AMA #1039539 |
05-21-2012, 11:57 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2009
|
The 1400 motor max current is 80 amps.
__________________
T-Rex 700E / T-Rex 600N / T-Rex 600ESP / T-Rex 550E T-Rex 500ESP / T-Rex 500 DFC / T-Rex 450 Pro / T-Rex 450SA T-Rex 250 / T-Rex 100 / Blade mCPx / Blade mCX MAAC: 80309 |
05-22-2012, 12:18 AM | #4 (permalink) |
HF Support
Join Date: Aug 2007
|
The Ice 100 is less than $20 more than the 75, just do yourself a favor and get the 100. It's best to have a little overhead with Castle anyway ...
|
05-22-2012, 12:31 AM | #5 (permalink) |
Registered Users
Join Date: Dec 2011
|
I have the 3226 1600 and I went with the ICE 100. no regrets
|
05-22-2012, 07:24 AM | #6 (permalink) |
Registered Users
|
Im running a ice 75 and sc 1400 motor no problems at 2600 HS.
__________________
|
05-22-2012, 03:09 PM | #7 (permalink) |
Registered Users
|
I run the 3026-1400 on my HC500 with a Castle 100A. Only issue I have with this set up is the 1400 and the ESC run hotter then my 2 other 500's with the 1900 and an ICE 100A. I'll take a look at the logs later today and post back. If you have the extra couple of bucks....the 100A is a nice ESC.
__________________
Trex700N2E Trex500ESPTT(PRO head and Tail ) Trex500ESP (Belted) HC500SE ....GO TEAM FLYBAR! |
05-22-2012, 04:49 PM | #8 (permalink) |
Registered Users
|
Average current on the 500 is right around 30 amps. with the 1400 motor I was getting spikes around 85ish, on 6S but well within the 75s capabilities.
If you have no bought the ESC yet, the 100 is not any bigger, so might be prudent to go that route? But if you have the 75 I wouldn't worry about it, I fly mine pretty hard, and the 75 worked good!
__________________
No Plankers were injured in the making of this post! TOY BOX contents Mcp x, 450 Pro VBar, 500 VBar, 12S 600CF VBar... Mikado Logo 6003D VBar Proudly flying KBDD, MKS, Castle, Scorpion and some planks too |
05-24-2012, 03:53 PM | #9 (permalink) |
Registered Users
|
I just put a 3026-1600 in my 500esp today.
With a 15 t pinion and using an ICE 75 ESC. HS is set to 2400 RPM. Much better than the 500L motor I had before. But my mini V-Bar makes the heli wobble, like. Cheers Erik
__________________
Beam600, 6203SB, 4025-630, ICE2HV80, Black VBar, Ino-Lab750, Savöx 1290MG Goblin 500, Quantum motor, BK mini servos, HobbyWing 100A v3, Fut. 6203SB, Vortex Vx1e. |
Thread Tools | |
Display Modes | |
|
|