Flybar

[qzxjkvb]

Is there something that holds the flybar in the main rotor? Pictures of the CB100 show a screw that goes into the flybar to hold it in the rotor. I've replace the flybar and it keeps sliding out to one side of the rotor.

[HeliIntervention]

Originally Posted by qzxjkvb

Is there something that holds the flybar in the main rotor? Pictures of the CB100 show a screw that goes into the flybar to hold it in the rotor. I've replace the flybar and it keeps sliding out to one side of the rotor.

There are two bearings on each side these go in the rotor head. Flybar slides into the rotor with two screws that thread facing the bearings into flybar. Be very careful with the bearing they have delicate races. Do you have these in CB00? These bearings cloud be damaged or lost You might have missed something in the flybar

If you have screws in to far in bearing that could be why it only slides one way. Also if everthing is there maybe they may have not gone in too the flybar. Agian be very careful with the bearing they are very delicate You might have missed something in the flybar. I can take pictures of mine you need them.