Register Now

Tool38 · 03-10-2010, 03:38 PM

Quote:

Originally Posted by Steve Evans

Anybody know of the whereabouts of a KX017011 manual (new frames + 780 gyro + 520 tail servo)?

Cheers,

Steve

Just found it for myself and remembered this thread.

http://video.align.com.tw/mpeg/manua...er%20Combo.pdf

Steve Evans · 03-10-2010, 04:35 PM

The KX017011 I ordered came in a KX017008TA box which had me muttering unkind things about chinese purveyors of Align helicopters until I opened said box to find the gyro and tail servo inside. The box was sealed with Align tape so I have to conclude that's how it left the factory. The manual is that of the KX017008TA.

Steve

wonko the sane · 05-05-2010, 08:02 AM

Hi there
Is there a different manual for the belt driven tail versions of the 500

carlocivicsi · 05-20-2010, 11:50 AM

can anyone tell me the basics of parallel and series.

im new at this and i would love to save money not buying new batteries if i can mix them together. for example i bough a new trex 500 esp and i have 6 3s 11.1v 2200 mah and the trex requires 6s 22.2v and at least 2200mha. so what can i do with this batteries?? thanks.

lindell26 · 05-20-2010, 01:03 PM

Quote:

Originally Posted by carlocivicsi

can anyone tell me the basics of parallel and series.

im new at this and i would love to save money not buying new batteries if i can mix them together. for example i bough a new trex 500 esp and i have 6 3s 11.1v 2200 mah and the trex requires 6s 22.2v and at least 2200mha. so what can i do with this batteries?? thanks.

Here is a very good site that explains the differences between parallel and series. The site mostly focuses on charging, but obviously it works the same for discharging.

http://sites.google.com/site/tjinguy...erial-charging

http://sites.google.com/site/tjinguy...allel-charging

The short story:
Two 3S 2200mah batteries wired in parallel = one 3S 4400mah pack
Two 3S 2200mah batteries wired in series = one 6S 2200mah pack

inkfreak74x9 · 09-18-2010, 12:32 PM

Ahh, I didnt Know Bob had a halarious side to him.

celm · 10-26-2010, 07:42 PM

when u guys first buy your new kits ,i guess you have to put a large part of it together.when you are doing your servo to swash rod links,are you making them to lenght that it says in the manual to start with.Or are you setting it to your preferance or to what ever it takes to make the swash level?

Jasmine2501 · 10-29-2010, 12:27 AM

Quote:

Originally Posted by celm

when u guys first buy your new kits ,i guess you have to put a large part of it together.when you are doing your servo to swash rod links,are you making them to lenght that it says in the manual to start with.Or are you setting it to your preferance or to what ever it takes to make the swash level?

Start with the suggested length, then adjust them so that your swash is level, the mixing arms are all level, and there is zero pitch on the blades, with the servo arms centered. Make them however long they need to be to reach the servos. Usually the measurements for the upper links will be correct - try to match those exactly. This should cause all the mixing arms to be level with zero pitch on the blades, and it will determine the proper 'zero pitch swash height' ... follow me? Then you just make the servo links long enough to reach the centered servo arm.

celm · 10-29-2010, 12:36 AM

Quote:

Originally Posted by Jasmine2501

Start with the suggested length, then adjust them so that your swash is level, the mixing arms are all level, and there is zero pitch on the blades, with the servo arms centered. Make them however long they need to be to reach the servos. Usually the measurements for the upper links will be correct - try to match those exactly. This should cause all the mixing arms to be level with zero pitch on the blades, and it will determine the proper 'zero pitch swash height' ... follow me? Then you just make the servo links long enough to reach the centered servo arm.

thats what i did ,i went with the manual as a start. then tweeked everthing so it was all level,etc...

JaggedEdge · 11-01-2010, 08:15 PM

I needed this manual yesterday.. Came on helifreak did a search and what do you know... Completely forgot I provided it. lol.

AndyBK · 11-02-2010, 11:31 AM

Greetings from Russia, Bob!

And thanks for manual!

mitchellliu · 05-25-2011, 11:00 PM

GOOD JOB. THANK YOU VERY MUCH.

blueindain1 · 10-09-2011, 08:26 PM

THANKYOU!!

nivaldin · 04-27-2012, 04:42 PM

Great!!
But my heli is the 3G torque tube version.

Anyone has this manual?

mlp3028 · 06-07-2012, 04:58 PM

I have the Trex 500 ESP 3G with TT manual if that will help.

mhills51 · 06-18-2012, 03:32 PM

I have the 500 efl pro manual if anyone needs it.

03-10-2010, 04:35 PM	#22 (permalink)
Steve Evans Registered Users Join Date: May 2007	The KX017011 I ordered came in a KX017008TA box which had me muttering unkind things about chinese purveyors of Align helicopters until I opened said box to find the gyro and tail servo inside. The box was sealed with Align tape so I have to conclude that's how it left the factory. The manual is that of the KX017008TA. Steve __________________ Trex 450SEv2/HS65-MGs cyclic/Spartan Quark/DS520 tail Trex 450ProV2 DFC/CGY750 FBL/DS410s cyclic/DS520 tail Trex 500ESP DFC/CGY750 FBL/YGE-120LV ESC/DS510s cyclic/DS650 tail Blackout 330/OpenPilot Revo with FatShark 600mW VTX, Futaba 8FG 2.4GHz

10-26-2010, 07:42 PM	#27 (permalink)
celm Registered Users Join Date: Jun 2010	when u guys first buy your new kits ,i guess you have to put a large part of it together.when you are doing your servo to swash rod links,are you making them to lenght that it says in the manual to start with.Or are you setting it to your preferance or to what ever it takes to make the swash level? __________________ Trex 700E DFC V-Bar , Trex 600N , Logo 600 SE FBL V-bar, Logo 600/550 FBL V-bar,Logo 400 FBL V-Bar ,Goblin 500 V-Bar, Blade 130X , Blade MCPx , Blade 500X

11-01-2010, 08:15 PM	#30 (permalink)
JaggedEdge Registered Users Join Date: Dec 2007	I needed this manual yesterday.. Came on helifreak did a search and what do you know... Completely forgot I provided it. lol. __________________ -TREX600NSP - TREX500ESP -TREX450FBL - TREX250 - CHP GAUI 550 - OXY3 - 30% EG Aircraft MX2 DLE55 -

06-07-2012, 04:58 PM	#35 (permalink)
mlp3028 Registered Users Join Date: Sep 2011 Location: Austin, Texas	I have the Trex 500 ESP 3G with TT manual if that will help. __________________ P 700 EVO, XLP Nimbus 550, P 380 EVO, Futaba ,YGE-T, neXt and Heli-X *Loud, sudden noises in a helicopter, WILL get your undivided attention*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-05-2010, 08:02 AM	#23 (permalink)
wonko the sane Registered Users My HF Map location Join Date: May 2010	Hi there Is there a different manual for the belt driven tail versions of the 500

05-20-2010, 11:50 AM	#24 (permalink)
carlocivicsi Registered Users Join Date: Mar 2010	can anyone tell me the basics of *parallel and series*. im new at this and i would love to save money not buying new batteries if i can mix them together. for example i bough a new trex 500 esp and i have 6 3s 11.1v 2200 mah and the trex requires 6s 22.2v and at least 2200mha. so what can i do with this batteries?? thanks.

09-18-2010, 12:32 PM	#26 (permalink)
inkfreak74x9 Registered Users Join Date: Sep 2010	Ahh, I didnt Know Bob had a halarious side to him.

11-02-2010, 11:31 AM	#31 (permalink)
AndyBK Registered Users Join Date: May 2010	Greetings from Russia, Bob! And thanks for manual!

05-25-2011, 11:00 PM	#32 (permalink)
mitchellliu Registered Users Join Date: Sep 2010	GOOD JOB. THANK YOU VERY MUCH.

10-09-2011, 08:26 PM	#33 (permalink)
blueindain1 Registered Users Join Date: Oct 2011	THANKYOU!!

04-27-2012, 04:42 PM	#34 (permalink)
nivaldin Registered Users Join Date: Apr 2012	Great!! But my heli is the 3G torque tube version. Anyone has this manual?

06-18-2012, 03:32 PM	#36 (permalink)
mhills51 Registered Users My HF Map location Join Date: Apr 2007	I have the 500 efl pro manual if anyone needs it.

Register Now

Log-in