usb connection - issues

[blade_crasher]

I'm on an old HP laptop using Win10. When I plug in the usb cable all is fine, the SW starts in the Dev Tab, but I just jump to where I want to be and all is fine.

It's odd though during a setup or fine tuning, there are times when the SW sort of looses connection to the Robird. The SW stops responding to mouse or inputs, in 15-30 seconds the Robird reconnects and I can continue.

It does not seem to lose track of where I'm at, it's just annoying.

Have others experienced this and is there a fix?

[PowerDyne]

That's normal. What is happening is that once you input a change, the Robird basically reboots itself after each change so it can calibrate, it will then reconnect.

You should still hit the save button each time you make a change, if only to ensure it took.

[blade_crasher]

Seems different than I recall from before. Seems to happen at random times. Wonder if it's a driver or Windows 10 change. I can live with it, it's just annoying to have the swash jump around when trying to set collective pitch etc.

Thanks for responding though.

[PowerDyne]

It could very well be drivers for W10 acting up.