 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
04-15-2012, 08:30 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Sep 2010
|
phase sensor wiring
when wiring the phase sensor can i solder the wire to the esc wire or must it go on the motor side. I ask cause it would be easier for it on the esc side. by the way I am talking bout the red wire that is supposed to be connected to one of the motor wires the one that give you the signal for the vbar gov
__________________
RCHN Citizen 790 -Protos maxv2 evo,xnova,Hw160, xpert, brain-Logo 600sxv2, hw130, mks scorpion,optipower,brainProtos -380 evo,Mks,xnova,HW,pulse,brain2. Jeti ds16 |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
04-15-2012, 10:29 PM
|
#2 (permalink) |
|
Registered Users
|
it MUST connect to the motor wire side of the ESC, which side of the bullet connect doesn't matter
__________________
Dave Goblin 500, Vbar, BLS153, BLS251, Kontronic Jive & Piro MutliWiiCopter Scarab Stealth Armour,Scarab Stealth Reconn V3, Scarab TriiKopta, Scarab Octa, Scarab Vampire |
|
|
|
|
04-16-2012, 09:59 AM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Sep 2010
|
that does not make sense to me. either side of the bullet connector one would be the motor side and the other would be the esc side. not trying to be rude just trying to understand what you mean so if I solder the red wire into the bullet connector attached to the esc i would good
__________________
RCHN Citizen 790 -Protos maxv2 evo,xnova,Hw160, xpert, brain-Logo 600sxv2, hw130, mks scorpion,optipower,brainProtos -380 evo,Mks,xnova,HW,pulse,brain2. Jeti ds16 |
|
|
|
|
04-16-2012, 10:27 AM
|
#4 (permalink) |
|
Registered Users
Join Date: Apr 2005
|
It does not matter if you solder to Male or Female, what deet means is the MOTOR side of the ESC, not battery side of ESC.
|
|
|
|
|
04-16-2012, 10:36 AM
|
#5 (permalink) |
|
Registered Users
Thread Starter
Join Date: Sep 2010
|
ok i got that part thanks for the answer guys. one more question mel if you have the time. im running a hobbywing platinum 40 amp on a trex 450 pro with the 1700 kv motor on 6s with version 1.9 on hw esc do you know of a thread with the best settings for the esc to run with miniv gov. I saw a post of your suggesting fgastest response time what setting are you referring to the slow start. right now I have it set for slow start 12pwm and 15 timing. youhave helped me so much with vbar and other issues and really appreeciate everything you let me know if there is anyway I can ever repay the favor. for now I try to answer all the repeat questions that I can so you can focus on the harder stuff. I did a quick search for setting but did not really find what i was looking for anyway nuff rambling. thanks you rock. thanks to you also deet.
__________________
RCHN Citizen 790 -Protos maxv2 evo,xnova,Hw160, xpert, brain-Logo 600sxv2, hw130, mks scorpion,optipower,brainProtos -380 evo,Mks,xnova,HW,pulse,brain2. Jeti ds16 |
|
|
|
|
04-16-2012, 10:38 AM
|
#6 (permalink) |
|
Registered Users
Join Date: Apr 2005
|
Cant comment on that motor but I would start with what you got, 12khz and 15 degree timing.
And yes, Fastest response, no I refer to Airplane mode setting "throttle response" |
|
|
|
|
04-16-2012, 12:22 PM
|
#7 (permalink) |
|
Registered Users
Thread Starter
Join Date: Sep 2010
|
so basically that is just govenor mode disabled then for fastest respone right? I do not see a specific setting for response
__________________
RCHN Citizen 790 -Protos maxv2 evo,xnova,Hw160, xpert, brain-Logo 600sxv2, hw130, mks scorpion,optipower,brainProtos -380 evo,Mks,xnova,HW,pulse,brain2. Jeti ds16 |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
