Register Now

hawkeye690 · 04-15-2013, 10:03 AM

So,I have a trex550E DFC/mb/DX8
The heli fly awsome but,on the tail,when giving rudder and stopping it,it will go a bit past and then come back a bit..called the ratching affect(i think).
Is this a gain problum in the radio or do i need to move the gain pot up a notch on the micro breast (AR7200BX)..
All the pots are at 12 oclock (factory settings)..
just wonderingif others had this going on and how to correct it..the tail should stop and stay.. (gyro gain is @ 40% in the DX8).
thanks for any help..

Bob O · 04-15-2013, 10:10 AM

This could be an effect of having too much servo travel. It could also be normal being that what you see on the bench might not be the same as what you get in the air.

Sent from my phone

04-15-2013, 10:03 AM	#1 (permalink)
hawkeye690 Registered Users Join Date: Apr 2009	tail has a rachat affect.Q. So,I have a trex550E DFC/mb/DX8 The heli fly awsome but,on the tail,when giving rudder and stopping it,it will go a bit past and then come back a bit..called the ratching affect(i think). Is this a gain problum in the radio or do i need to move the gain pot up a notch on the micro breast (AR7200BX).. All the pots are at 12 oclock (factory settings).. just wonderingif others had this going on and how to correct it..the tail should stop and stay.. (gyro gain is @ 40% in the DX8). thanks for any help..

04-15-2013, 10:10 AM	#2 (permalink)
Bob O Member My HF Map location Join Date: Dec 2008	Re: tail has a rachat affect.Q. This could be an effect of having too much servo travel. It could also be normal being that what you see on the bench might not be the same as what you get in the air. Sent from my phone __________________ ):>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in