Roban "RedBull" AS350 scale 700 size heli

[tintmaster]

Hate to do it, but I have decided to sell my scale project. I found a racer I want and want to direct my time towards drag racing again.

I bought it used. It came with an Align RCM-BL700MX 510KV motor. Also came with 2- Pulse 6S 5000Ah lipos. Came with stock 3 blade head and a new Century 3 blade head which I have started putting on. Stock tail section as well, but I upgraded to a Trex 600 complete aluminum tail section (After seeing "Tailkiller" breaking). And Dennis has helped out tremendously!! I will leave it up to you what head you want to use.I also bought a new Goblin main shaft to do the mod.

I upgraded the ESC from a 80A to a 120A Castle Ice2 HV120 just to be on the safe side. I also installed 3 Torq BL9080 HV cyclic servos and a Torq BL9188 HV tail servo that can run on straight 2S. I also added a Reactor HVx Voltage regulator set up to run on 3S!! I added Castle connectors on the ESC, Regulator, 3S lipo, and including the connectors for 2-6S lipos.

Did some work on the inside of fuse to make it more sturdy. Added a battery hold down in the front section for the 3S lipo. I did get the mechanics installed and set in the fuse (but not the fiberglass tail section).

While taking pictures tonight noticed the fiberglass tail section has a little damage (Grandkids I think), but not to bad. Also has the left red nav light broken. The rest are ok. I also re-soldered the Nav lights mother board and it works now.

The only thing missing is the Flybarless system!!
Here is whats included:

Complete Roban AS350 700 fuselage and mechanics w/ stock 3 blade head
Align RCM-BL700MX 510KV motor
Castle Ice2 HV120 ESC with Quick Link
Reactor HVx Regulator
JR R921 DSM Receiver with 1 satellite
3-Torq BL9080 HV cyclic servos w/ metal servo arms
1-Torq BL9188 HV tail servo
2-Pulse 6S 5000mAh lipos (used)
1-Pulse 3S 2250mAh lipo (used)
New Century 3 blade head w/Vario swash follower
3-stock scale blades
1-pair stock tail blades
3-Edge 690mm main carbon blades (193grams each)
1-NIP Edge 105mm tail blades
New Align Trex 600 aluminum tail section
1-NIP Goblin 12mm main shaft
2-new Castle battery connectors

And will include GI Jane figure ($50 value)!!!

I have well over $1500 in this. Asking $1050, plus actual shipping cost. PP fees included. Will only ship within the USA, sorry it will be way to expensive and a pain in the butt to ship international.
Sorry no trades as I am getting out of hobby. Only trade I would do is for a Yuneec Typhoon H RTF!!

Feel free to call me at 316-204-6933. Thanks, Eugene

[zuizehely]

Is that a big round crack in front of the head opening in image 2568?

[tintmaster]

No its not.

And price drop!!

[tintmaster]

Shipping will be around $75. And I will insure it as well!! Anything over $75 and I will cover it!!

So $1125 shipped!!! Needs a new home!!

[tintmaster]

TTT

[tintmaster]

Needs a good home!!

[blueleagueflyers]

Do you have a picture of the whole heli put together and ready?

[tintmaster]

No, it is still in the build stage. You will have to finish it. I do have a picture of it together just to see what it looks like. With the stock head on it.

[tintmaster]

Will sell everything MINUS servos for $875 shipped!!!

[tintmaster]

Still available.

But I am going on vacation (Cruise) and will be back on the 27th. So I won't be checking in till then. So please be patient and I will get back with you.

[tintmaster]

I'm baaaccckkk!!

Still for sale. Had 2 guys call me saying they wanted it but never went through. Needs a good home!!

$1125 SHIPPED and PP fees for it all including the Red head pilot!!!!!!

[TRex700MRX]

Looking hard . . . . .

[tintmaster]

TTT

[tintmaster]

Just got a DJI Naza-H for it. Here's some pics of it. Got the Naza-H mounted, wired to Tx and setup (Somewhat). Still needs to be gone through setup to get the numbers dead on. I didn't put the exact numbers in for the COG, just eyeballed the swash, and didn't set the pitch.

So now it is a BNF bird, just have to finish final setup. Price now is $1425 shipped!

[tintmaster]

Still available!! Almost ready for test flight!!!


And I will not part any of it out!

[tintmaster]

Sorry no trades now as I just got a Yuneec Typhoon H! For sale only!

[JurassicJet]

Wow. Lot of damage on that bird.

[tintmaster]

No the only bad damage is on the boom by the "Red Bull" from when I moved a few months back. The antenna's where already off when I got it, they can be glued back on. After all this is not a brand new fuselage.

And my final price is $1300 BNF for everything shipped and PP'ed!!

[tintmaster]

Will make it RTF w/ JR 11X!!

RTF -$1600
BNF -$1300
No Naza-h, R921 or servos -$900

All include shipping and PP fees!!

Its almost ready for test flight!!

[tintmaster]

Still available!!